Docking station connector
09 July, 2009 | Supplied by: Harting (HK) Limited
The Han-Modular docking frame enables a docking connector in the IP20 range to be set up without a housing, for use in insertion processes, such as racks in switch cabinets, that are not hand guided.
Shielded M8 cord sets
09 July, 2009 | Supplied by: Turck Australia Pty Ltd
The M8 picofast cord sets are now optionally available as a completely shielded unit by connecting a braided shield directly to the coupling nut. This provides a reliable connection with 100% cable and connector shielding, which protects against electromagnetic and radiofrequency interference.
Energy storage batteries
09 July, 2009 | Supplied by: Valen Power Pty Ltd
The SEC TSG range of 12 V sealed lead acid batteries deploys Monobloc Catalyst technology for long-life operation, thereby combining the safety and low-maintenance advantages of sealed lead acid batteries with the long life of normal lead acid batteries.
Flange mounting enclosures
09 July, 2009 | Supplied by: Stahlin Non-Metallic Enclosures
A full flange accessory option is available for the DiamondShield series of nonmetallic enclosures, providing improved mounting versatility in positioning enclosures to fit onto poles, struts or walls in both indoor and outdoor applications including harsh corrosive and industrial environments.
Low harmonic drives
09 July, 2009 | Supplied by: Danfoss (Australia) Pty Ltd
The VLT low harmonic drive eliminates the harmonic disturbances on the supply grid by actively imposing currents into the grid so that the high-quality sine wave of the grid current is restored.
Strain gauge signal conditioner
09 July, 2009 | Supplied by: Weidmuller Pty Ltd
The ACT20P-Bridge strain gauge signal conditioner and isolator provides four switch-selectable input ranges of 0 to ±10, 20, 30 and 50 mV and proportional analog output of between 0-22 mA with loads of <600 Ω, and 0-11 V with loads >1 kΩ. Accuracy is claimed as being better than 0.05%, with a temperature drift of better that 50 ppm over the range of -40 to +70 °C.
Cable bushings and grommets
09 July, 2009 | Supplied by: NPA Pty Ltd
The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.
Liquid-tight tubing and fittings
09 July, 2009 | Supplied by: NPA Pty Ltd
The Heyco range of Flex III liquid-tight tubing and fittings has been expanded with the release of 3/8- and 1-inch sizes.
Watertight enclosures
09 July, 2009 | Supplied by: Hammond Electronics Pty Ltd
The 1457 extruded aluminium family of small enclosures has been expanded with the introduction of RFI-screened IP54 environmentally sealed versions. The 1457 E series is designed to house PCBs and small electronic, electrical or pneumatic components.
Q25L magnetically actuated linear displacement sensor
09 July, 2009 | Supplied by: Turck Australia Pty Ltd
The Q25L sensor is a magnetically actuated linear displacement sensor designed to detect piston position on pneumatic cylinders.
Chemical resistant connectors
09 July, 2009 | Supplied by: Soanar Limited
The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.
DC-DC converters
09 July, 2009 | Supplied by: Powerbox Australia Pty Ltd
The Vicor DC-DC 28 VDC input family has been expanded with the addition of eight wide-input Micro DC-DC converters.
Quick-disconnect sensors
09 July, 2009 | Supplied by: Turck Australia Pty Ltd
The range of FM-approved 12, 18 and 30 mm 3-wire DC barrel sensor and cordset combinations has been expanded to include quick-disconnect sensors that may be used in Class I, Division 2, Groups A, B, C and D environments when equipped with a Turck lokfast guard. Sensors with potted-in cable for use with conduit are also FM approved for these locations.
Power quality monitor
08 July, 2009 | Supplied by: Westek Electronics Pty Ltd
The KoCoS EPPE C8 power quality and power line monitor is a comprehensive electrical analyser in a panel-mounting instrument package suitable for applications that include busbar, feeder and individual load monitoring and power quality analysis.
Electrical ground test kit
08 July, 2009
|
Supplied by:
AEMC Instruments
The Tower and Substation GroundFlex Field Kit includes the GroundFlex Adapter model 6474 and Ground Resistance Tester model 6472 to test ground resistance of individual power transmission tower legs and total resistance without disconnecting the overhead ground wire. It is designed to save time and money and enhance safety for operators.
