Switchboard enclosure
16 October, 2009 | Supplied by: Bremca
The Bremca 250 Series switchboard enclosure system can be described as a ‘Meccano set’ for switchboard builders, able to be constructed in virtually any sized board, in vertical and horizontal increments of 250 mm.
Power supplies with programmable output voltage
16 October, 2009 | Supplied by: ADM Systems Pty Ltd
The Mean Well SPV range of single output power supplies with programmable output voltage function has been extended to the lower wattages of 150 and 300 W, with the introduction of the SPV-150 and SPV-300 series.
Vision sensors for harsh environments
16 October, 2009 | Supplied by: Micromax Pty Ltd
The PresencePlus P4 IP68-rated sealed Omni-vision sensor from Banner Engineering features a compact, yet durable, nickel-plated aluminium housing that can withstand demanding washdown conditions - as well as dust and debris common in harsh-duty environments - with the use of an integrated ring light or lens cover.
Cable tray system
15 October, 2009 | Supplied by: Turck Australia Pty Ltd
The Snap Track aluminium cable tray system, from TechLine Manufacturing, is assembled with push pins instead of traditional nuts and bolts; it simply snaps into place without the use of tools, thus reducing installation time.
DC power rectifier
15 October, 2009 | Supplied by: Vertiv Australia Pty Ltd
The eSure DC power rectifier is designed to be used to power electronic equipment in the telecommunications industry, delivering a claimed 97% energy efficiency, meaning far less energy is wasted in the conversion from AC to DC power. Less wasted energy results in an equivalent reduction of generated heat, which results in lower cooling requirements and reduced infrastructure costs.
Cable management system
15 October, 2009 | Supplied by: Atkore International
The Acrofil range of wire-mesh cable tray features the ‘Autolock’ system and welded splices that help to make installing and connecting cable tray fast and simple, by eliminating the need to use nut and bolt connections. The self-splicing bars, which are pre-installed onto the cable management system, eliminate the need for a typical nut-and-bolt type connection.
Industrial cases
15 October, 2009 | Supplied by: Soanar Limited
The Rolec aluCASE series of heavy-duty, die-cast enclosures has been expanded with eight additional sizes and two versions with clear polycarbonate lids.
Die-cast aluminium enclosures
15 October, 2009 | Supplied by: Hammond Electronics Pty Ltd
The 1550 range of industry-standard sized, small die-cast aluminium enclosures provides robust mechanical protection and good EMC attenuation levels, making them suitable for use in a wide variety of applications. The initial range comprises six sizes, with the full range expanding 16 sizes over time.
Han EE high-density industrial connector
15 October, 2009 | Supplied by: Harting (HK) Limited
The Han EE high-density connector module utilises Han-Quick Lock technology to enable cabling to be assembled without tools.
Power Products CR-SB chemical resistant connectors
25 September, 2009 | Supplied by: Soanar Limited
The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.
DC-DC converters
25 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The Vicor DC-DC 28 VDC input family has been expanded with the addition of eight wide-input Micro DC-DC converters.
Safety goggles
02 September, 2009 | Supplied by: Shamir Lens
The G-Force series safety goggles are available in two models.
Power factor correction capacitor banks
02 September, 2009 | Supplied by: Westek Electronics Pty Ltd
Power factor correction capacitor banks from Janitza Electronics are suitable for LV three-phase power distribution. They are supplied with detuning chokes, discharge resistors, internal busbar system and HRC fusegear.
Three-phase uninterruptible power supply
02 September, 2009 | Supplied by: Schneider Electric IT Australia
The MGE Galaxy 3500 is a three-phase general-purpose uninterruptible power supply (UPS) designed for applications in the 10-40 kVA segment – from small electrical rooms up to demanding industrial environments.
Energy-storing capacitors
02 September, 2009 | Supplied by: Soanar Limited
The WIMA SuperCap double-layer capacitors are now available as cascaded and balanced modules with capacitances up to 200 F or with nominal voltages up to 28 VDC, for use in applications such as slip control of large wind power plants, starting micro-turbines, fuel cell start-up, starting large V16 or V24 cylinder motors in train or naval drives, energy storage in conjunction with photovoltaic devices, recuperation of braking energy for automobiles and parallel connection to batteries in vehicles or other applications.
