DC power rectifier
15 October, 2009 | Supplied by: Vertiv Australia Pty Ltd
The eSure DC power rectifier is designed to be used to power electronic equipment in the telecommunications industry, delivering a claimed 97% energy efficiency, meaning far less energy is wasted in the conversion from AC to DC power. Less wasted energy results in an equivalent reduction of generated heat, which results in lower cooling requirements and reduced infrastructure costs.
Industrial cases
15 October, 2009 | Supplied by: Soanar Limited
The Rolec aluCASE series of heavy-duty, die-cast enclosures has been expanded with eight additional sizes and two versions with clear polycarbonate lids.
Cable management system
15 October, 2009 | Supplied by: Atkore International
The Acrofil range of wire-mesh cable tray features the ‘Autolock’ system and welded splices that help to make installing and connecting cable tray fast and simple, by eliminating the need to use nut and bolt connections. The self-splicing bars, which are pre-installed onto the cable management system, eliminate the need for a typical nut-and-bolt type connection.
Han EE high-density industrial connector
15 October, 2009 | Supplied by: Harting (HK) Limited
The Han EE high-density connector module utilises Han-Quick Lock technology to enable cabling to be assembled without tools.
DC-DC converters
25 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The Vicor DC-DC 28 VDC input family has been expanded with the addition of eight wide-input Micro DC-DC converters.
Power Products CR-SB chemical resistant connectors
25 September, 2009 | Supplied by: Soanar Limited
The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.
DIN-rail power supplies
02 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The PBAMR product family is a Class II output DIN-rail switching power supply that is suited to building and factory automation applications and electromechanical and marine-related installations with medium to high power demand.
Fire-resistant workwear
02 September, 2009 | Supplied by: Extreme Safety
The Extreme Safety range of fire-resistant workwear includes overalls, shirts, jackets, wet-weather parkas and trousers.
Three-phase uninterruptible power supply
02 September, 2009 | Supplied by: Schneider Electric IT Australia
The MGE Galaxy 3500 is a three-phase general-purpose uninterruptible power supply (UPS) designed for applications in the 10-40 kVA segment – from small electrical rooms up to demanding industrial environments.
Active harmonic filter
02 September, 2009 | Supplied by: Westek Electronics Pty Ltd
The Schaffner ECOSine Active 60 A filter is designed for harmonics mitigation in commercial and industrial electrical installations where loading can change rapidly and unpredictably.
Safety goggles
02 September, 2009 | Supplied by: Shamir Lens
The G-Force series safety goggles are available in two models.
Intrinsically safe power supply
02 September, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.
Electrical lockout solution
02 September, 2009 | Supplied by: Mayo Hardware Australia
The Master Lock S430 is a multi-person shackle lockout hasp for use in electrical lockout/tagout applications.
Photovoltaic switch disconnector
02 September, 2009 | Supplied by: Kraus & Naimer Pty Ltd
The PV Solar Switch Disconnector range will assist in ensuring a photovoltaic (PV) solar power installation complies with local standards and international standard IEC 60364-7-712, which specifies that a switch disconnector be installed on the DC side of PV inverters.
Tags for extreme environments
02 September, 2009 | Supplied by: Mayo Hardware Australia
Made from rugged industrial-grade polypropylene, the Master Lock Guardian Extreme tags are designed to withstand harsh conditions including dust, dirt, high humidity, UV radiation, harsh chemicals, washdowns and extreme temperatures as found in situations such as food processing, mining, refineries, chemical plants and paper mills.
