Industrial cases
15 October, 2009 | Supplied by: Soanar Limited
The Rolec aluCASE series of heavy-duty, die-cast enclosures has been expanded with eight additional sizes and two versions with clear polycarbonate lids.
Die-cast aluminium enclosures
15 October, 2009 | Supplied by: Hammond Electronics Pty Ltd
The 1550 range of industry-standard sized, small die-cast aluminium enclosures provides robust mechanical protection and good EMC attenuation levels, making them suitable for use in a wide variety of applications. The initial range comprises six sizes, with the full range expanding 16 sizes over time.
Cable management system
15 October, 2009 | Supplied by: Atkore International
The Acrofil range of wire-mesh cable tray features the ‘Autolock’ system and welded splices that help to make installing and connecting cable tray fast and simple, by eliminating the need to use nut and bolt connections. The self-splicing bars, which are pre-installed onto the cable management system, eliminate the need for a typical nut-and-bolt type connection.
Cable tray system
15 October, 2009 | Supplied by: Turck Australia Pty Ltd
The Snap Track aluminium cable tray system, from TechLine Manufacturing, is assembled with push pins instead of traditional nuts and bolts; it simply snaps into place without the use of tools, thus reducing installation time.
Han EE high-density industrial connector
15 October, 2009 | Supplied by: Harting (HK) Limited
The Han EE high-density connector module utilises Han-Quick Lock technology to enable cabling to be assembled without tools.
Power Products CR-SB chemical resistant connectors
25 September, 2009 | Supplied by: Soanar Limited
The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.
DC-DC converters
25 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The Vicor DC-DC 28 VDC input family has been expanded with the addition of eight wide-input Micro DC-DC converters.
Intrinsically safe power supply
02 September, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.
Cable terminations and jointing kits
02 September, 2009 | Supplied by: CABAC
The JointMaster range of medium-voltage cable terminations and jointing kits is available for use in both indoor and outdoor electrical installations and applications.
Insulated footwear
02 September, 2009 | Supplied by: Steel Blue
The Steel Blue Townsville EH Series hiker shoe (827138) is a 95 mm mid-cut laced boot designed to insulate up to 600 V.
Portable power distribution boards
02 September, 2009 | Supplied by: Powersafe Products
The Powersafe portable power distribution boards provide users with the safety afforded by residual current device (RCD) miniature circuit breakers (MCBs) that are fitted in the distribution boards, intended for use on worksites.
Power factor correction capacitor banks
02 September, 2009 | Supplied by: Westek Electronics Pty Ltd
Power factor correction capacitor banks from Janitza Electronics are suitable for LV three-phase power distribution. They are supplied with detuning chokes, discharge resistors, internal busbar system and HRC fusegear.
Electrical switches and sockets
02 September, 2009 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Industrial Strength Options (ISO) switches and sockets range has been expanded to include back boxes and a wider range of switches, plugs and sockets.
DIN-rail power supplies
02 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The PBAMR product family is a Class II output DIN-rail switching power supply that is suited to building and factory automation applications and electromechanical and marine-related installations with medium to high power demand.
Energy-storing capacitors
02 September, 2009 | Supplied by: Soanar Limited
The WIMA SuperCap double-layer capacitors are now available as cascaded and balanced modules with capacitances up to 200 F or with nominal voltages up to 28 VDC, for use in applications such as slip control of large wind power plants, starting micro-turbines, fuel cell start-up, starting large V16 or V24 cylinder motors in train or naval drives, energy storage in conjunction with photovoltaic devices, recuperation of braking energy for automobiles and parallel connection to batteries in vehicles or other applications.
