Power supplies with programmable output voltage
16 October, 2009 | Supplied by: ADM Systems Pty Ltd
The Mean Well SPV range of single output power supplies with programmable output voltage function has been extended to the lower wattages of 150 and 300 W, with the introduction of the SPV-150 and SPV-300 series.
Waterproof connectors
16 October, 2009 | Supplied by: Connector-Tech ALS Pty Ltd
The Tajimi R04 connectors feature a tight waterproof mechanism that allows them to operate at a depth of up to 20 m when mated, making them suitable for installation in applications where there is exposure to extreme weather or high humidity.
Rackmount power supply
16 October, 2009 | Supplied by: ADM Systems Pty Ltd
The Mean Well HRP-75 series is a 75 W AC/DC enclosed power supply, designed to provide energy savings through features such as low ‘no-load’ energy consumption, built-in active PFC function (PF >0.9), high operating efficiency and built-in remote ‘on/off’ control.
Vision sensors for harsh environments
16 October, 2009 | Supplied by: Micromax Pty Ltd
The PresencePlus P4 IP68-rated sealed Omni-vision sensor from Banner Engineering features a compact, yet durable, nickel-plated aluminium housing that can withstand demanding washdown conditions - as well as dust and debris common in harsh-duty environments - with the use of an integrated ring light or lens cover.
Cable management system
15 October, 2009 | Supplied by: Atkore International
The Acrofil range of wire-mesh cable tray features the ‘Autolock’ system and welded splices that help to make installing and connecting cable tray fast and simple, by eliminating the need to use nut and bolt connections. The self-splicing bars, which are pre-installed onto the cable management system, eliminate the need for a typical nut-and-bolt type connection.
DC power rectifier
15 October, 2009 | Supplied by: Vertiv Australia Pty Ltd
The eSure DC power rectifier is designed to be used to power electronic equipment in the telecommunications industry, delivering a claimed 97% energy efficiency, meaning far less energy is wasted in the conversion from AC to DC power. Less wasted energy results in an equivalent reduction of generated heat, which results in lower cooling requirements and reduced infrastructure costs.
Industrial cases
15 October, 2009 | Supplied by: Soanar Limited
The Rolec aluCASE series of heavy-duty, die-cast enclosures has been expanded with eight additional sizes and two versions with clear polycarbonate lids.
Die-cast aluminium enclosures
15 October, 2009 | Supplied by: Hammond Electronics Pty Ltd
The 1550 range of industry-standard sized, small die-cast aluminium enclosures provides robust mechanical protection and good EMC attenuation levels, making them suitable for use in a wide variety of applications. The initial range comprises six sizes, with the full range expanding 16 sizes over time.
Cable tray system
15 October, 2009 | Supplied by: Turck Australia Pty Ltd
The Snap Track aluminium cable tray system, from TechLine Manufacturing, is assembled with push pins instead of traditional nuts and bolts; it simply snaps into place without the use of tools, thus reducing installation time.
Han EE high-density industrial connector
15 October, 2009 | Supplied by: Harting (HK) Limited
The Han EE high-density connector module utilises Han-Quick Lock technology to enable cabling to be assembled without tools.
Power Products CR-SB chemical resistant connectors
25 September, 2009 | Supplied by: Soanar Limited
The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.
DC-DC converters
25 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The Vicor DC-DC 28 VDC input family has been expanded with the addition of eight wide-input Micro DC-DC converters.
Photovoltaic switch disconnector
02 September, 2009 | Supplied by: Kraus & Naimer Pty Ltd
The PV Solar Switch Disconnector range will assist in ensuring a photovoltaic (PV) solar power installation complies with local standards and international standard IEC 60364-7-712, which specifies that a switch disconnector be installed on the DC side of PV inverters.
DIN-rail power supplies
02 September, 2009 | Supplied by: Powerbox Australia Pty Ltd
The PBAMR product family is a Class II output DIN-rail switching power supply that is suited to building and factory automation applications and electromechanical and marine-related installations with medium to high power demand.
Double clear plug bases
02 September, 2009 | Supplied by: Legrand Australia P/L
The 37/2 series of clear polycarbonate double plug bases provides increased visibility of the terminated electrical wiring to check for faults more effectively.
