Electrical distribution

Heatshrink tubing

01 December, 2008 | Supplied by: StockCap

The range of Stockcap heatshrink products has been expanded with the addition of low-voltage (LV) medium-wall (MW) heatshrink tubes.


Insulation, continuity and resistance tester

01 November, 2008 | Supplied by: Power Parameters Pty Ltd

The Hioki 3490 analog insulation, continuity and resistance tester has been designed for use by both industrial and domestic electricians in keeping with the testing requirements of AS/NZS 3017.


Advanced ‘smart’ electricity meter developed

08 October, 2008

The Power Electronics team at Swansea University's School of Engineering in Wales has developed a highly advanced smart electricity meter that can monitor the energy usage of individual appliances, as well as measure the power generated by micro-renewable technologies.


Safe blade disposal

01 October, 2008 | Supplied by: Martor Australia

The Safebox 108000 is designed for safe deposition of used snap-off blade segments. It is inaccessible to fingers so used blades are prevented from causing injuries once deposited.


Cable-rolling toolbox

01 October, 2008 | Supplied by: Reelmate Toolbox Company

The Reelmate Toolbox combines a personal toolbox with a cable roller. The simple design suits most small to medium-size cable reels up to 20 kg and can be used in many different applications.


Safety barrier

01 October, 2008 | Supplied by: Pall Mall Manufacturing Co

The Expanding Mobile Barrier is an easy-to-move, wheeled package with a footprint just 600 x 330 mm. However, once the elasticised securing straps are unhooked, the device grows to a 4 m long barrier.


Cordsets with shielding option

01 October, 2008 | Supplied by: Turck Australia Pty Ltd

The 6- and 8-pin M23 powerfast connectors are now available as moulded cordsets, which may also be completely shielded by connecting a braided shield directly to the connector’s coupling nuts.


Vacuum switches

01 October, 2008 | Supplied by: PIAB Vacuum Technologies

The VS4128 and VS4118 mini vacuum switches are suitable for industries and applications with high demands on durability, such as automotive assembly. The switches fit Piab’s entire range of vacuum pumps for decentralised systems.


Multiple gas monitors

01 October, 2008 | Supplied by: Draeger Australia Pty. Ltd.

The X-am 2000 is a four-gas detector that reliably measures explosive gases and vapours, as well as O2, CO and H2S. It is suitable for confined space use and comes in a special case with charger, electronic pump and tubing.


ConPower circular connector range

01 October, 2008 | Supplied by: ERNTEC Pty Ltd

The ConPower circular connectors range consists of two lines: the P30 has the M23 threaded locking systems, while the P70 has the M40 system.


Pit covers

01 October, 2008 | Supplied by: ACO Polycrete Pty Ltd

ACO is the first approved registered supplier of pit covers to Queensland Main Roads. Types 1, 3, 4, 7, 8 and 60 cable pits comply with Queensland Main Roads specifications MRS 11.78 Fabrication of Structural Steelwork; MRS 11.91 Ducts and Pits; and are manufactured to Main Roads standard drawings.


Industrial safety helmet

01 October, 2008 | Supplied by: Australian Supreme Import

The HammerHead safety helmet is certified to AS/NZS 1801 as a Type 1 industrial on-site safety helmet and can be used in conjunction with on-site safety visors and mesh screens, providing simultaneous face protection. A visor holder locks the visors and mesh screens onto the helmet, while the chin strap enhances head protection.


Nylon glove with latex palm

01 October, 2008 | Supplied by: RCR International Pty Ltd

The Taipan glove is a form-fitting nylon glove with a latex palm, designed to provide good grip, dexterity and feel.


Laser range meter

01 October, 2008 | Supplied by: Hilti (Aust) Pty Ltd

The PD 4 laser range meter measures distances of 0.2 to 70 m and is designed to be a convenient tool in construction applications while providing laser precision for reliable measurements.


Rail mounting enclosures

01 October, 2008 | Supplied by: ERNTEC Pty Ltd

Erntec offers enclosures for M3 DIN rail mounting enclosures ranging from 1-9 modules.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd