igus continually rotating energy chain
31 August, 2010 | Supplied by: Treotham Automation Pty Ltd
The igus continually rotating energy chain is a ready-to-install module that features lightweight and reliable chains, with speeds of up to 8 m/s allowing fast machine cycle times to be realised.
SEW-Eurodrive DUV30A vibration analysis sensor
31 August, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
The DUV30A vibration analysis sensor replaces the DUV10A, providing faster sampling times at a constant speed and allowing the monitoring of more dynamic gear-unit applications. It enables gear-unit maintenance planning, as the sensor allows the early detection of roller bearing and gearing wear and damage, as well as gear-unit unbalance and resonance detection.
Developing new insulators using nanoparticles
31 August, 2010
Siemens is searching for new technologies for use as insulators on electrical wiring that will make generators more efficient.
Conduit developments in hazardous areas
10 August, 2010 by Phil Winship* | Supplied by: Adaptaflex Pty Ltd
New developments in metallic and nonmetallic conduits provide cost-effective alternatives for installing electrical and communications cabling in hazardous areas.
Switches and GPOs don’t have to be so bland
05 August, 2010 by Giuseppe Parola*
Not long after I first arrived here in Australia, I met an architect who told me that he didn’t want light switches to be visible in homes. When I asked him why, he simply said: “Because they’re ugly.” I suspect such an attitude is not uncommon amongst many architects, and even some home owners, given the universal use of basic white switch plates and GPOs in this country.
Is power protection costing more than it should?
05 August, 2010 | Supplied by: Eaton Electrical (Australia) Pty Ltd
All electronics in an organisation - from desktops to data centres - require continuous, clean power. Anything less puts businesses at risk of data corruption, equipment damage and unplanned downtime. Most organisations meet this requirement by having a central UPS that serves an entire building/data centre, or distributed UPSs placed closer to the equipment being protected, or both.
Fitel S178 fusion splicer and S325 cleaver
05 August, 2010 | Supplied by: TechRentals
The Fitel S178 fusion splicer and S325 cleaver are now available to rent.
Western Telematic PTS-9CM20-2 automatic power transfer switch
29 July, 2010 | Supplied by: Interworld Electronics and Computer Industries
The PTS-9CM20-2 automatic power transfer or redundant power switch from Western Telematic is claimed to provide a reliable method of automatically switching equipment to a backup power source. By constantly monitoring a primary power source, redundant power switches can decide when to switch to a secondary redundant source to ensure that critical network devices are always up and running.
Upsonic power surge and spike protection power board
05 July, 2010 | Supplied by: Upsonic Power Pty Ltd
The Upsonic power surge and spike protection power board is designed to protect and fit with home theatre audiovisual components, offering 3672 J of protection with a response time of less than 1 ns.
VMR series remote power distribution units
01 July, 2010 | Supplied by: Interworld Electronics and Computer Industries
The VMR series remote power distribution units (PDUs) with output power metering allow secure power management of rackmount equipment via web browser, telnet, external modem or local terminal interfaces.
NHP Resistant Orange ISO plug and socket range
01 July, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Resistant Orange line has been added to the NHP ISO plug and socket range for industrial, commercial and domestic applications.
Kraus & Naimer PV solar switch disconnector range
01 July, 2010 | Supplied by: Kraus & Naimer Pty Ltd
The PV solar switch disconnector range is claimed to allow installations to comply with local standards and IEC 60364-7-712. These standards stipulate that a double-pole isolating device (switch disconnector) is required on the DC side of PV inverters.
Moxa IMC-P101 industrial PoE media converters
01 July, 2010 | Supplied by: CrispTech Pty Ltd
The Moxa IMC-P101 series of UL508-certified industrial PoE media converters offer a long-distance ethernet-to-fibre communications solution, while adding PoE functionality to reduce cabling costs and set-up times.
Hoffman Panelite low-profile enclosure lights
01 July, 2010 | Supplied by: Pentair
The Hoffman Panelite range of low-profile enclosure lights that includes compact LED and fluorescent versions is designed for quick installation into Proline enclosures, as well as most other enclosures.
Cembre Rolly 2000 thermal transfer printer and Genius software
01 July, 2010 | Supplied by: Industrial Labelling Solutions
The Cembre Rolly 2000 is a 300 dpi high-resolution printer using thermal transfer technology designed for high-volume printing of wire markers, cable labels and cable markers for electrical, switchboard and control panel labelling requirements.
