Industrial ethernet extender
03 February, 2009The Westermo DDW-120 high-speed industrial ethernet extender utilises SHDSL transmission technology, allowing existing twisted pair cables to be used to establish a high-speed remote connection between two ethernet networks.
Fan coil controller
02 February, 2009The DDFCUC fan coil unit controller provides air-temperature management in commercial environments, such as hotels and offices, while seamlessly integrating with complementary control systems.
Automation controller
01 February, 2009The CompactLogix L23 Allen-Bradley controller is an addition to the CompactLogix family, extending the functionality and flexibility of the Logix control platform to small machine-level control applications.
C65xx series industrial PCs
01 February, 2009The C65xx series of industrial PCs (IPC) is designed to be installed in control cabinets or in the rear panel of a control or console housing. By integrating the IPC into an existing housing, this compact solution enables flexible push-button configurations and extension options at the front of the console housing.
LSW16G and LSW24G gigabit ethernet switches
29 January, 2009The rackmount LSW16G and LSW24G unmanaged gigabit ethernet switches are equipped with 16 x 10/100/1000 Mbps and 24 x 10/100/1000 Mbps ports respectively. The switches provide a backbone link to switched workgroup or a server ‘fat-pipe’ link.
Lighting/building automation gateway
01 January, 2009The 100BT ethernet gateway series of 10/100 Base-T ethernet interfaces permits ethernet connectivity between Dynalite’s DyNet peer-to-peer communications serial bus network and third-party technologies, such as audiovisual and building automation systems.
Motor starter module
01 December, 2008The BL20 motor starter economy module enables daisy-chain connection from a single I/O module to up to 48 motor starters via a ribbon cable on a single fieldbus node.
Compact operator panel
01 December, 2008The Simatic HMI TP 177B is a widescreen-format operator panel that expands the 170 family of panels, notable for their compact format and a visualisation screen.
Venetian blind drives
01 December, 2008The Dunkermotoren Venetian blind motors are AC induction motors for short-time-operation with mounted gear boxes.
Timing module
01 December, 2008The Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs.
Hazardous area motor starters
01 December, 2008The Stahl DOL electrical motor starters are a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.
High-efficiency motors
01 December, 2008A range of low-voltage AC motors has been launched with improved energy efficiency and life cycle values over the ABB models they replace.
MSS series DC servomotor
01 December, 2008The Mavilor MSS series servomotors are claimed to provide a 20% increase in power-to-weight and volume ratios and a 20% increase in power rate and acceleration capability over previous designs.
Industrial automation servomotors
01 December, 2008The Dunkermotoren BG75 servomotors provide intelligent drives for drive solutions including industrial automation, with outputs of up to 500 W and 5 Nm.
Relay output module
01 December, 2008The USB-IDIO series of USB 2.0 relay output devices are designed to add isolated input and solid-state output capabilities to any computer with a USB port.
