Santern variable speed drive range
08 July, 2009The Sinus Nano, Micro and Penta ranges of variable speed drives, manufactured by Santern, have recently been introduced to Australia and New Zealand.
Stratix series industrial ethernet switches
03 February, 2009The Rockwell Automation/Cisco co-branded Stratix series is a range of industrial ethernet switches.
Industrial gigabit ethernet switch
03 February, 2009The Moxa EDS-G509 is an industrial ethernet switch that support up to nine gigabit ethernet ports with five fibre-optic ports. It is designed for installation in harsh industrial environments, able to operate in temperature extremes ranging from -40 to 75 °C and supported by 12/24/48 VDC or 24 VAC redundant dual power inputs.
Embedded controller
03 February, 2009The Simatic S7-mEC embedded controller and EM PC and EM PCI-104 expansion modules facilitate the connection of Simatic S7 to PCs.
Industrial ethernet extender
03 February, 2009The Westermo DDW-120 high-speed industrial ethernet extender utilises SHDSL transmission technology, allowing existing twisted pair cables to be used to establish a high-speed remote connection between two ethernet networks.
Output filters for motor drives
03 February, 2009The Schaffner 510 series output filters reduce voltage slew rate (dV/dt) from inverter drives for variable-speed motors. High-voltage slew rates can cause overstressing of long motor drive cables and cause insulation breakdowns in motor windings.
Ethernet USB device servers
03 February, 2009The USBN-500 series of USB device servers from Quatech is available in three models and is designed to connect a wide range of USB peripherals to members on a network. The technology allows individuals to connect to and share single-user USB devices with co-workers through an 802.11b/g wireless network or a wired local area network.
Fan coil controller
02 February, 2009The DDFCUC fan coil unit controller provides air-temperature management in commercial environments, such as hotels and offices, while seamlessly integrating with complementary control systems.
Automation controller
01 February, 2009The CompactLogix L23 Allen-Bradley controller is an addition to the CompactLogix family, extending the functionality and flexibility of the Logix control platform to small machine-level control applications.
C65xx series industrial PCs
01 February, 2009The C65xx series of industrial PCs (IPC) is designed to be installed in control cabinets or in the rear panel of a control or console housing. By integrating the IPC into an existing housing, this compact solution enables flexible push-button configurations and extension options at the front of the console housing.
LSW16G and LSW24G gigabit ethernet switches
29 January, 2009The rackmount LSW16G and LSW24G unmanaged gigabit ethernet switches are equipped with 16 x 10/100/1000 Mbps and 24 x 10/100/1000 Mbps ports respectively. The switches provide a backbone link to switched workgroup or a server ‘fat-pipe’ link.
Lighting/building automation gateway
01 January, 2009The 100BT ethernet gateway series of 10/100 Base-T ethernet interfaces permits ethernet connectivity between Dynalite’s DyNet peer-to-peer communications serial bus network and third-party technologies, such as audiovisual and building automation systems.
Compact operator panel
01 December, 2008The Simatic HMI TP 177B is a widescreen-format operator panel that expands the 170 family of panels, notable for their compact format and a visualisation screen.
Open-frame industrial monitors
01 December, 2008The OPD Series of open-frame industrial monitors has been expanded through the latest OPD-11x6 Series TFT LCDs.
Motor starter module
01 December, 2008The BL20 motor starter economy module enables daisy-chain connection from a single I/O module to up to 48 motor starters via a ribbon cable on a single fieldbus node.
