Moxa IKS-6500 industrial rackmount ethernet switches
16 April, 2010 byThe Moxa IKS-6500 range of industrial rackmount ethernet switches supports flexible copper/fibre configurations with gigabit uplink, media and power redundancy, network management functionalities and industrial rugged design.
Baldor MicroFlex e100 and MotiFlex e100 drives
16 April, 2010 byThe Mint Lite programming capability is fitted on all MicroFlex e100 and MotiFlex e100 single- and three-phase drive ranges. These drives are available in power ratings up to 33.5 A. The versatile drives may be used to control rotary and linear servo motors, linear motors, closed-loop vector motors and in V/Hz control modes.
Harting Ha-VIS FTS 3100s-A fast ethernet switch
16 April, 2010 byThe Ha-VIS FTS 3100s-A fast ethernet switch utilises Fast Track Switching technology to satisfy the majority of performance and determinism requirements in ethernet automation networks.
Allen-Bradley Kinetix 300 EtherNet/IP servo drive
15 April, 2010 byThe Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drive enables a single communication network to be used for easier machine commissioning, configuration and start-up.
Turck IMS low-profile interface modules
15 April, 2010 byThe IMS low-profile interface modules are now UL certified for Class I, Division 2, Groups A, B, C and D hazardous locations. The 6.2 mm wide modules provide galvanic isolation, resisting electrical interference and noise in busy plant environments, with signal conditioning for new or retrofit hazardous area installations.
West Control Solutions eCAL 1/16 DIN temperature controller
15 April, 2010 byThe eCAL 1/16 DIN (48 x 48 mm) compact temperature controller from West Control Solutions is suitable for stand-alone and retrofit industrial process equipment.
Should you throw away the instruction manual?
08 April, 2010 by Paul StathisMost of us are averse to reading instruction manuals when we take delivery of some piece of equipment. We used to joke about getting the kids to program the home VCR because it was so complicated and the instruction manual was too hard to follow. But when it comes to electrical systems that are even more complex that we have to install and commission, we don’t have the luxury of being able to fob it off to the kids to get it working.
Schneider Electric Altivar 312 variable speed drives
15 March, 2010 byThe Altivar 312 variable speed drives feature auto-tuning, pre-programmed application settings and enhanced communication capabilities to ensure suitability for applications ranging from stand-alone production machines to integrated process architectures.
ABB ACS2000 air-cooled general-purpose AC drives
15 March, 2010 byThe ACS2000 air-cooled general-purpose AC drives are rated from 400 to 1000 kVA and up to 6.9 kV, and are designed for high reliability, easy installation and fast commissioning. Typical applications include fan, pump and compressor control in water, cement, mining, metals, oil and gas, pulp and paper, and power-generation industries.
Rockwell Automation Allen-Bradley PowerFlex 753 AC drive
15 March, 2010 byThe Allen-Bradley PowerFlex 753 AC drive has been optimised for general-purpose induction motor control applications, with enhanced safety features, DeviceLogix embedded control technology and predictive diagnostics.
Rockwell Automation Allen-Bradley 193-EC5 E3 Plus overload relay
15 March, 2010 byThe Allen-Bradley 193-EC5 E3 Plus solid-state overload relay combines current and voltage protection with power monitoring and diagnostic capabilities to help improve energy efficiency, safeguard electric motor loads and speed up troubleshooting in low-voltage applications such as materials handling, process, water, petrochemical and mining.
Interworld Electronics ACS-2701 embedded controller
19 February, 2010 byThe ACS-2701 waterproof IP65-rated embedded controller is a small, fully sealed, fanless computer system designed for extreme environmental conditions.
SCS Filtration MTA DE air dryers
19 February, 2010 byThe MTA DE range of refrigerated air dryers are available in sizes from 0.3 to 37.5 m3/min.
Hirschmann RSB managed industrial ethernet switch
19 February, 2010 byThe Hirschmann RSB Series of basic managed industrial ethernet switches consists of 16 models with different numbers and types of ports offered, factory settings for fast EtherNet/IP commissioning and specific operating temperature ranges.
CrispTech Moxa NPort S8455I-MM-SC ethernet switch and server
05 February, 2010 byThe Moxa NPort S8455I-MM-SC combines an ethernet switch and serial device server in a single solution, with two fibre ethernet ports, three ethernet ports and four RS-232/422/485 serial ports. Its compact size saves cabinet space and the all-in-one design reduces overall power consumption.
