Industrial gigabit ethernet switch
03 February, 2009The Moxa EDS-G509 is an industrial ethernet switch that support up to nine gigabit ethernet ports with five fibre-optic ports. It is designed for installation in harsh industrial environments, able to operate in temperature extremes ranging from -40 to 75 °C and supported by 12/24/48 VDC or 24 VAC redundant dual power inputs.
Stratix series industrial ethernet switches
03 February, 2009The Rockwell Automation/Cisco co-branded Stratix series is a range of industrial ethernet switches.
Industrial ethernet extender
03 February, 2009The Westermo DDW-120 high-speed industrial ethernet extender utilises SHDSL transmission technology, allowing existing twisted pair cables to be used to establish a high-speed remote connection between two ethernet networks.
Output filters for motor drives
03 February, 2009The Schaffner 510 series output filters reduce voltage slew rate (dV/dt) from inverter drives for variable-speed motors. High-voltage slew rates can cause overstressing of long motor drive cables and cause insulation breakdowns in motor windings.
Fan coil controller
02 February, 2009The DDFCUC fan coil unit controller provides air-temperature management in commercial environments, such as hotels and offices, while seamlessly integrating with complementary control systems.
Automation controller
01 February, 2009The CompactLogix L23 Allen-Bradley controller is an addition to the CompactLogix family, extending the functionality and flexibility of the Logix control platform to small machine-level control applications.
C65xx series industrial PCs
01 February, 2009The C65xx series of industrial PCs (IPC) is designed to be installed in control cabinets or in the rear panel of a control or console housing. By integrating the IPC into an existing housing, this compact solution enables flexible push-button configurations and extension options at the front of the console housing.
LSW16G and LSW24G gigabit ethernet switches
29 January, 2009The rackmount LSW16G and LSW24G unmanaged gigabit ethernet switches are equipped with 16 x 10/100/1000 Mbps and 24 x 10/100/1000 Mbps ports respectively. The switches provide a backbone link to switched workgroup or a server ‘fat-pipe’ link.
Lighting/building automation gateway
01 January, 2009The 100BT ethernet gateway series of 10/100 Base-T ethernet interfaces permits ethernet connectivity between Dynalite’s DyNet peer-to-peer communications serial bus network and third-party technologies, such as audiovisual and building automation systems.
Timing module
01 December, 2008The Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs.
Hazardous area motor starters
01 December, 2008The Stahl DOL electrical motor starters are a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.
High-efficiency motors
01 December, 2008A range of low-voltage AC motors has been launched with improved energy efficiency and life cycle values over the ABB models they replace.
Relay output module
01 December, 2008The USB-IDIO series of USB 2.0 relay output devices are designed to add isolated input and solid-state output capabilities to any computer with a USB port.
Open-frame industrial monitors
01 December, 2008The OPD Series of open-frame industrial monitors has been expanded through the latest OPD-11x6 Series TFT LCDs.
Intelligent batch controller
01 December, 2008The IBC is an intelligent batch controller with an 8-digit 14 mm character height LED display. All functions of the instrument are programmable from the front panel by touch buttons with tactile feedback. Variables are stored in non-volatile memory.
