Wireless power control
01 July, 2008The Banner Engineering FlexPower wireless nodes are designed to enable Banner SureCross monitoring and control systems to operate using 10-30 VDC line power, solar panels or battery modules in remote or difficult-to-access locations.
BG42 and BG45 brushless DC motors
01 July, 2008The Dunkermotoren range of brushless DC motors has been expanded with the release of the BG42 and BG45 models, designed for use in industrial automation and medical applications.
Brushless motors
01 June, 2008The EC-max 2-wire brushless motor features an ironless winding resulting in a highly efficient motor that turns detent free. The reduction to two connection wires allows brush motors to be directly replaced.
CMP-series servomotors
01 June, 2008The CMP-series servomotors are lower-torque motors that complement the CM-series servo in a compact form-factor.
Allen-Bradley CompactLogix Motion controller
01 June, 2008The Allen-Bradley CompactLogix L45 controller delivers scalable and integrated motion control. Controlling up to eight axes of motion, the device is suitable for end users with small- to mid-range applications, or machine builders looking to standardise on a single integrated motion control platform.
Geared stepper motor
01 June, 2008Long life and reliability are key attributes for motors used in industrial and commercial automation applications. The Portescap 26 mm geared stepper motors can be used in applications ranging from security cameras to packaging robotic arms and robotic end effectors.
Electric motor catalogue
01 June, 2008Baldor has published its first catalogue of stocked electric motor products.
BL67 ethernet gateway
01 June, 2008The BL67 ethernet gateway is designed for Profinet network systems typically used in long conveyor systems.
Ironless motors
01 April, 2008The Escap DC motor range, manufactured by Portescap, is designed for use in medical, HVAC, aerospace and commercial applications.
EDS-728 gigabit ethernet switch
01 April, 2008The Moxa EDS-728 is a modular ethernet switch that supports up to four gigabit ports, 24 fast ethernet ports and advanced network control. The device is specially designed for redundant gigabit network backbones and uses a modular configuration for network expansion.
Internet-linked safety I/O
01 April, 2008The CompactBlock Guard I/O on EtherNet/IP series are safety I/O modules equipped with EtherNet/IP connectivity. The 1791ES-IB16 and the 1791ES-IB8XOBV4 modules allow users to streamline network architectures by employing industry-standard EtherNet/IP protocol for all safety, standard and motion control communications.
Moxa PowerTrans industrial ethernet switches
01 April, 2008The Moxa PowerTrans series of industrial ethernet switches are designed to meet the specific requirements of power substation systems, traffic control systems and railway applications.
Hirschmann WLAN industrial ethernet system
27 February, 2008The Hirschmann BAT54-Rail WLAN industrial ethernet system is claimed to provide a seamless high-capacity extension to existing industrial LANs, with secure access to plant information anywhere in the factory.
NextMove ESB2 Motion controller
01 February, 2008NextMove-ESB2 is an 'all-in-one' motion automation controller supplied in a rugged and ready-to-use packaged form.
Ethernet port multiplier
01 February, 2008The CU2508 ethernet port multiplier enables precisely timed transmission and reception of ethernet frames by means of distributed clocks for real-time industrial ethernet networks.
