Harmonic filtering solutions for VSDs
03 February, 2009 | NHP Electrical Engineering Products Pty Ltd
NHP’s Advanced Active Front End/Regenerative VSD solutions produce a very low level of harmonic distortion in addition to providing benefits for managing regenerative energy back into the mains power grid.
Clamp-on AC logger
03 February, 2009 | AEMC Instruments
The Simple Logger II Model CL601 is a battery-powered, 1-channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Harmonic measurements are calculated from these 64 samples. Frequency tracking is performed over the range of ±2 Hz around the nominal line frequency (50 or 60 Hz).
Category 6A cabling system
03 February, 2009 | Nexans Olex Australia Pty Ltd
The LANmark-6A cabling system is part of the Nexans Cat 6A Zero Risk Solution, based on shielded products that ensure immunity from alien crosstalk and designed to address developing 10 Gb applications. Its release follows the recent ratification of international standards for new copper class category 6A standard (500 MHz) developed to support 10 Gb applications.
Bus terminal I/O multimeter
03 February, 2009 | Beckhoff Automation Pty Ltd
The Beckhoff digital multimeter terminal adds measurement functions to its I/O system. Using the instrument with a fieldbus interface for measuring current and voltage, measured values can be processed directly in the I/O system or by the master controller. These dynamic measuring terminals are available for both the Beckhoff Bus and EtherCAT terminal systems.
EX600 series true RMS clamp meters
03 February, 2009 | Teledyne FLIR
The EX600 series of true RMS clamp meters features an IR thermometer for locating hot spots and NCV, making it an all-in-one solution for both electrical and HVAC professionals.
Audio lead tester
03 February, 2009 | Soundcorp Pty Limited
The Quest LT01 cable tester is designed to test for polarity (phase reversal) and continuity in a variety of analog and digital audio leads and cables.
Industrial gigabit ethernet switch
03 February, 2009 | CrispTech Pty Ltd
The Moxa EDS-G509 is an industrial ethernet switch that support up to nine gigabit ethernet ports with five fibre-optic ports. It is designed for installation in harsh industrial environments, able to operate in temperature extremes ranging from -40 to 75 °C and supported by 12/24/48 VDC or 24 VAC redundant dual power inputs.
Video surveillance data enclosure
03 February, 2009 | Rittal Pty Ltd
The Rittal security box enclosure is a tamper-proof security enclosure aimed at helping organisations protect their video surveillance equipment from unauthorised access.
GX10 lamp holder
03 February, 2009 | Soanar Limited
The 25.835 GX10 lamp holder from BJB is designed for use with HID lamps, typically installed in retail premises, exhibition areas and other types of architectural lighting.
SDR-240 DIN rail power supplies
03 February, 2009 | ADM Instrument Engineering Group
The SDR-240 is the first model in the Meanwell Slim DIN rail product series of DIN rail power supplies. The slim design of 63.5 mm in width saves space on the rail and makes it 42% smaller in size in comparison to its predecessor model.
Rack-mountable hot air exhaust system
03 February, 2009 | LeisureTech Electronics Pty Ltd
The Cool-Stack III, manufactured by Active Thermal Management, is a rack-mountable one-unit high hot air exhaust system that utilises four 120 mm fans that are claimed to pull up to 70 cfm of hot air out from tightly packed racks, while generating low noise levels of 26 dB. Heated air is exhausted through the perforated front panel, or exhaust fittings and tubing provided with the unit, to move hot air away from a cabinet.
Data wall plate
03 February, 2009 | CommScope Technologies Australia Pty Ltd
The CopperTen 3-port Faceplate has been specifically designed to meet the performance requirements of 10 Gb ethernet applications, by spacing the outlets sufficiently distant from each other to minimise the impact of alien crosstalk at the outlet.
Embedded controller
03 February, 2009 | Siemens Ltd
The Simatic S7-mEC embedded controller and EM PC and EM PCI-104 expansion modules facilitate the connection of Simatic S7 to PCs.
Cable certification and ethernet tester software
03 February, 2009 | Keysight Technologies Australia Pty Ltd
An advanced network test option for the WireScope Pro cable certification tester has been released for the validation and pre-qualification of voice over IP services and to stress test ethernet connections.
Data equipment cabinet
03 February, 2009 | M Rutty & Co Pty Ltd
SmartRack is a multipurpose equipment cabinet that allows for 19", metric and wider ETSI sized equipment to be fitted in the one rack.
