Benchtop drop saw
03 February, 2009 | Power Machinery Pty Ltd
The Willy 225 industrial strength sawing machine is a small bench-model sawing machine that is built entirely from cast iron and features bronze gear, case-hardened grounded worm screw and screw-locked swivelling head for mitre cuts of 0 to 45° left.
Noise suppression chokes
03 February, 2009 | Westek Electronics Pty Ltd
Schaffner noise suppression chokes cover symmetrical (differential) and asymmetrical (common-mode) noise suppression.
Output filters for motor drives
03 February, 2009 | Westek Electronics Pty Ltd
The Schaffner 510 series output filters reduce voltage slew rate (dV/dt) from inverter drives for variable-speed motors. High-voltage slew rates can cause overstressing of long motor drive cables and cause insulation breakdowns in motor windings.
Quick-connect wiring system
03 February, 2009 | Turck Australia Pty Ltd
The M16 powerfast wiring system comprises cordsets and 2-, 3- and 4-pin connectors and tees in compact form factors for machine power distribution and motor control, providing a time- and cost-saving replacement for traditional hard-wiring installations.
Surge protection
03 February, 2009 | Novaris Pty Ltd
The SLT range of threaded instrument protectors provides surge protection for most forms of industrial monitoring and control.
Category 7A cabling system
03 February, 2009 | Nexans Olex Australia Pty Ltd
The LANmark-7A shielded cabling solution has been developed to meet the predicted demand for 40 Gbps data applications from data centres and users planning to provide ‘video on demand’ services. Its release follows the recent ratification of international standards for new copper class category 7A standard (1000 MHz) designed for 40 Gbps applications.
Crimp lugs for flexible cables
03 February, 2009 | Crimp-Tech Australia Pty Ltd
Dual System by Elpress AB is designed for crimping copper lugs onto flexible or welding cables. The copper lug is first crimped with a conventional hexagonal crimp, then, while the hex dies are still closed, a sequential indent crimp is performed.
Computer room air conditioning
03 February, 2009 | Rittal Pty Ltd
The CRAC computer room air conditioning system is designed for installation and use in low- and medium-density data centre and computer processing environments.
Harmonic filtering solutions for VSDs
03 February, 2009 | NHP Electrical Engineering Products Pty Ltd
NHP’s Advanced Active Front End/Regenerative VSD solutions produce a very low level of harmonic distortion in addition to providing benefits for managing regenerative energy back into the mains power grid.
Clamp-on AC logger
03 February, 2009 | AEMC Instruments
The Simple Logger II Model CL601 is a battery-powered, 1-channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Harmonic measurements are calculated from these 64 samples. Frequency tracking is performed over the range of ±2 Hz around the nominal line frequency (50 or 60 Hz).
Category 6A cabling system
03 February, 2009 | Nexans Olex Australia Pty Ltd
The LANmark-6A cabling system is part of the Nexans Cat 6A Zero Risk Solution, based on shielded products that ensure immunity from alien crosstalk and designed to address developing 10 Gb applications. Its release follows the recent ratification of international standards for new copper class category 6A standard (500 MHz) developed to support 10 Gb applications.
Bus terminal I/O multimeter
03 February, 2009 | Beckhoff Automation Pty Ltd
The Beckhoff digital multimeter terminal adds measurement functions to its I/O system. Using the instrument with a fieldbus interface for measuring current and voltage, measured values can be processed directly in the I/O system or by the master controller. These dynamic measuring terminals are available for both the Beckhoff Bus and EtherCAT terminal systems.
EX600 series true RMS clamp meters
03 February, 2009 | Teledyne FLIR
The EX600 series of true RMS clamp meters features an IR thermometer for locating hot spots and NCV, making it an all-in-one solution for both electrical and HVAC professionals.
Audio lead tester
03 February, 2009 | Soundcorp Pty Limited
The Quest LT01 cable tester is designed to test for polarity (phase reversal) and continuity in a variety of analog and digital audio leads and cables.
Industrial gigabit ethernet switch
03 February, 2009 | CrispTech Pty Ltd
The Moxa EDS-G509 is an industrial ethernet switch that support up to nine gigabit ethernet ports with five fibre-optic ports. It is designed for installation in harsh industrial environments, able to operate in temperature extremes ranging from -40 to 75 °C and supported by 12/24/48 VDC or 24 VAC redundant dual power inputs.
