DTX-TERA adapter kit
12 August, 2009 | TechRentals
The Fluke DTX Siemon Tera Adapter Kit is a fast, accurate way to certify Class F cabling systems to ISO standards using the TERA connector system.
Digital ohmmeter
01 August, 2009 | TechRentals
The Megger DLRO 10X Microhmmeter has been introduced into TechRentals’ rental fleet.
Cylindrical presence sensors
01 August, 2009 | Rockwell Automation Australia
The Allen-Bradley 42CA Series C range of 18 mm cylindrical photoelectric sensors has been improved and expanded, now featuring 0.5 and 1 ms response times, which makes them suitable for general-purpose and high-speed applications in the packaging, assembly and materials handling industries.
Gigabit uplink
01 August, 2009 | Daanet Pty Ltd
Hirschmann Industrial Ethernet has expanded its range to include a 10-port switch in the IP67-rated Octopus family of networking devices.
Fire-rated downlights
30 July, 2009 | Adaptaflex Pty Ltd
The JCC Fireguard range of fire-rated downlights is designed for commercial and domestic applications and meets the relevant Australian building regulations, having been tested to meet AS1530.4-2005, the fire-resistant test of downlights penetrating a floor ceiling system.
Fire-rated downlights
27 July, 2009 | Adaptaflex Pty Ltd
The JCC Fireguard range of fire-rated downlights is designed for commercial and domestic applications and meets the relevant Australian building regulations, having been tested to meet AS1530.4-2005 — the fire-resistant test of downlights penetrating a floor ceiling system.
Industrial ethernet user guide
09 July, 2009 | Belden Australia Pty Ltd
BeldenÂ’s industrial ethernet user guide is a 16-page brochure that offers specific information about the performance differences between commercial off-the-shelf (COTS) ethernet components typically used in office environments and rugged industrial-grade components.
Philips Dynalite DIR-TX8 infrared transmitter
09 July, 2009 | Philips Dynalite
The DIR-TX8 infrared transmitter is designed to provide cost-effective integration and control of all types of infrared-controllable devices, such as AV equipment.
Industrial category 6 UTP cable
09 July, 2009 | Belden Australia Pty Ltd
The DataTuff 7940A category 6 UTP industrial ethernet cable is EtherNet/IP compliant and designed for high-speed data transmission.
Category 6 UTP cable
09 July, 2009 | Belden Australia Pty Ltd
The DataTwist 3600 series of category 6 UTP copper cables consists of four pairs of 23 AWG insulated copper conductors with a round flexible core construction and a central spline that maintains pair separation and matched conductors on all four pairs.Â
Cable bushings and grommets
09 July, 2009 | NPA Pty Ltd
The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.
Watertight enclosures
09 July, 2009 | Hammond Electronics Pty Ltd
The 1457 extruded aluminium family of small enclosures has been expanded with the introduction of RFI-screened IP54 environmentally sealed versions. The 1457 E series is designed to house PCBs and small electronic, electrical or pneumatic components.
Touch-panel industrial PC
09 July, 2009 | Cutter Electronics
The OTP/57V compact touch-panel PC, manufactured by SSV, is designed to suit HMI installations where limited mounting space is available.
Strain gauge signal conditioner
09 July, 2009 | Weidmuller Pty Ltd
The ACT20P-Bridge strain gauge signal conditioner and isolator provides four switch-selectable input ranges of 0 to ±10, 20, 30 and 50 mV and proportional analog output of between 0-22 mA with loads of <600 Ω, and 0-11 V with loads >1 kΩ. Accuracy is claimed as being better than 0.05%, with a temperature drift of better that 50 ppm over the range of -40 to +70 °C.
Docking station connector
09 July, 2009 | Harting (HK) Limited
The Han-Modular docking frame enables a docking connector in the IP20 range to be set up without a housing, for use in insertion processes, such as racks in switch cabinets, that are not hand guided.
