SDR-240 DIN rail power supplies
03 February, 2009 | ADM Systems Pty Ltd
The SDR-240 is the first model in the Meanwell Slim DIN rail product series of DIN rail power supplies. The slim design of 63.5 mm in width saves space on the rail and makes it 42% smaller in size in comparison to its predecessor model.
Rack-mountable hot air exhaust system
03 February, 2009 | LeisureTech Electronics Pty Ltd
The Cool-Stack III, manufactured by Active Thermal Management, is a rack-mountable one-unit high hot air exhaust system that utilises four 120 mm fans that are claimed to pull up to 70 cfm of hot air out from tightly packed racks, while generating low noise levels of 26 dB. Heated air is exhausted through the perforated front panel, or exhaust fittings and tubing provided with the unit, to move hot air away from a cabinet.
Data wall plate
03 February, 2009 | CommScope Technologies Australia Pty Ltd
The CopperTen 3-port Faceplate has been specifically designed to meet the performance requirements of 10 Gb ethernet applications, by spacing the outlets sufficiently distant from each other to minimise the impact of alien crosstalk at the outlet.
Embedded controller
03 February, 2009 | Siemens Ltd
The Simatic S7-mEC embedded controller and EM PC and EM PCI-104 expansion modules facilitate the connection of Simatic S7 to PCs.
Cable certification and ethernet tester software
03 February, 2009 | Keysight Technologies Australia Pty Ltd
An advanced network test option for the WireScope Pro cable certification tester has been released for the validation and pre-qualification of voice over IP services and to stress test ethernet connections.
Data equipment cabinet
03 February, 2009 | M Rutty & Co Pty Ltd
SmartRack is a multipurpose equipment cabinet that allows for 19", metric and wider ETSI sized equipment to be fitted in the one rack.
Intrinsically safe transceiver
03 February, 2009 | Micromax Pty Ltd
The Banner Engineering DX99 wireless transceiver node is designed for installation in hazardous areas and combines three technologies in a single housing: battery-based power supply, wireless technology for mission critical data and intrinsically safe operation.
Large-scale power board
03 February, 2009 | Jackson Industries
The PT8282 is a 2 m long power board that contains 10 mains outlets that are spaced 200 mm apart to enable devices, including plug packs and chargers, to be connected to mains supply.
Earth leakage circuit breaker
03 February, 2009 | NHP Electrical Engineering Products Pty Ltd
The Terasaki ZS earth leakage moulded case circuit breaker (MCCB) offers machine or personnel protection within a standard 125 A, 160/250 A MCCB frame size. The MCCB maintains the functionality of a standard thermal-magnetic overload/short-circuit protection device.
Single-sided fibreglass ladders
03 February, 2009 | CABAC
The Cablad single-sided fibreglass ladders are available in three models, varying in height from 1.5 to 2.4 m, and are manufactured in high-visibility yellow fibreglass.
Industrial ethernet extender
03 February, 2009 | Madison Technologies
The Westermo DDW-120 high-speed industrial ethernet extender utilises SHDSL transmission technology, allowing existing twisted pair cables to be used to establish a high-speed remote connection between two ethernet networks.
Power transfer switch
03 February, 2009 | Eaton Electrical (Australia) Pty Ltd
Eaton has expanded its ePDU rack power distribution range with the 16 A single-phase Powerware eATS rackmounted automatic transfer switch.
3D thermal imaging software
03 February, 2009 | Fluke Australia Pty Ltd
Version 2.0 of the SmartView software for Fluke thermal imagers provides 3D imaging capability and additional options to optimise and organise thermal images and create professional reports.
Tradies’ Bluetooth headset
03 February, 2009 | Plantronics Pty Ltd
The Explorer 370 is a ruggedised Bluetooth headset designed to withstand harsh conditions so outdoor workers and tradespeople can answer calls and continue working.
Programmable transfer switches
03 February, 2009 | Vertiv Australia Pty Ltd
The ASCO transfer switches deliver a solenoid operating mechanism for the high-speed transfer of loads between alternate sources of power. Combined with a programmable controller, they facilitate advanced methods of transferring many types of loads, such as motors, electronic drives, UPSs and microprocessor-based systems to mitigate interruption or complete loss of electrical power.
