Products

Coloured cable reticulation

28 August, 2009 | CMS Electracom Pty Ltd

CMS Cirqlate is a series of plastic disks specifically designed for assembly as cable reticulation and protection when bringing power and data cables from the floor or from the ceiling to the work surface.

Home automation touch screen

28 August, 2009 | Philips Dynalite

The DTP100 Revolution colour touch screen is an easy-to-use interface, allowing users to manage aspects of their environment, including lighting and temperature, while the fascia can be matched to nearly any architectural surface. Typical applications include homes, apartments, boardrooms and hotel rooms.

DTX-TERA adapter kit

12 August, 2009 | TechRentals

The Fluke DTX Siemon Tera Adapter Kit is a fast, accurate way to certify Class F cabling systems to ISO standards using the TERA connector system.

Digital ohmmeter

01 August, 2009 | TechRentals

The Megger DLRO 10X Microhmmeter has been introduced into TechRentals’ rental fleet.

Cylindrical presence sensors

01 August, 2009 | Rockwell Automation Australia

The Allen-Bradley 42CA Series C range of 18 mm cylindrical photoelectric sensors has been improved and expanded, now featuring 0.5 and 1 ms response times, which makes them suitable for general-purpose and high-speed applications in the packaging, assembly and materials handling industries.

Gigabit uplink

01 August, 2009 | Daanet Pty Ltd

Hirschmann Industrial Ethernet has expanded its range to include a 10-port switch in the IP67-rated Octopus family of networking devices.

Fire-rated downlights

30 July, 2009 | Adaptaflex Pty Ltd

The JCC Fireguard range of fire-rated downlights is designed for commercial and domestic applications and meets the relevant Australian building regulations, having been tested to meet AS1530.4-2005, the fire-resistant test of downlights penetrating a floor ceiling system.

Fire-rated downlights

27 July, 2009 | Adaptaflex Pty Ltd

The JCC Fireguard range of fire-rated downlights is designed for commercial and domestic applications and meets the relevant Australian building regulations, having been tested to meet AS1530.4-2005 — the fire-resistant test of downlights penetrating a floor ceiling system.

Industrial ethernet user guide

09 July, 2009 | Belden Australia Pty Ltd

BeldenÂ’s industrial ethernet user guide is a 16-page brochure that offers specific information about the performance differences between commercial off-the-shelf (COTS) ethernet components typically used in office environments and rugged industrial-grade components.

Philips Dynalite DIR-TX8 infrared transmitter

09 July, 2009 | Philips Dynalite

The DIR-TX8 infrared transmitter is designed to provide cost-effective integration and control of all types of infrared-controllable devices, such as AV equipment.

Weatherproof T8 battens

09 July, 2009 | Osram Australia Pty Ltd

The Neptune ‘Fit & Forget’ series weatherproof fluorescent lighting battens are designed for long life and low maintenance, utilising the Osram Lumilux XXT T8 lamp with a claimed lamp life of up to 75,000 h.

Watertight enclosures

09 July, 2009 | Hammond Electronics Pty Ltd

The 1457 extruded aluminium family of small enclosures has been expanded with the introduction of RFI-screened IP54 environmentally sealed versions. The 1457 E series is designed to house PCBs and small electronic, electrical or pneumatic components.

Strain gauge signal conditioner

09 July, 2009 | Weidmuller Pty Ltd

The ACT20P-Bridge strain gauge signal conditioner and isolator provides four switch-selectable input ranges of 0 to ±10, 20, 30 and 50 mV and proportional analog output of between 0-22 mA with loads of <600 Ω, and 0-11 V with loads >1 kΩ. Accuracy is claimed as being better than 0.05%, with a temperature drift of better that 50 ppm over the range of -40 to +70 °C.

Category 6 UTP cable

09 July, 2009 | Belden Australia Pty Ltd

The DataTwist 3600 series of category 6 UTP copper cables consists of four pairs of 23 AWG insulated copper conductors with a round flexible core construction and a central spline that maintains pair separation and matched conductors on all four pairs. 

Cable bushings and grommets

09 July, 2009 | NPA Pty Ltd

The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.

  • All content Copyright © 2026 Westwick-Farrow Pty Ltd