IR P660 thermography camera
01 August, 2008 | Supplied by: FLIR Systems Australia Pty Ltd
The IR P660 thermography camera has been developed for applications requiring higher image quality, temperature measurement accuracy and image detail than standard IR imagers. Such applications include utilities, energy, telecom, mining and facility management, often where assets needing inspection are scattered over larger areas.
T200 and T250 infrared cameras
01 August, 2008 | Supplied by: FLIR Systems Australia Pty Ltd
The T200 and T250 handheld infrared cameras have been added to the T-Series range of thermal imaging instruments, designed for industrial and technical applications, with a ‘B-version’ also available for building and construction applications.
MIT and S1 insulation testers
01 August, 2008 | Supplied by: Megger Limited
The MIT and S1 insulation testers have been enhanced so that they now meet the requirements for use in CAT IV 600 V applications. This makes them suitable for performing measurements at the source of supply in low-voltage installations and offer immunity to high-voltage transients up to 8 kV.
48-port Hi-D 'Plug&Go' patch panel
16 July, 2008 | Supplied by: http://www.ampnetconnect.com.au
AMP Netconnect's MRJ21 is a 48-port 1U Hi-D 'Plug&Go' patch panel.
Power quantity analyser
01 July, 2008 | Supplied by: AEMC Instruments
The PowerPad Jr model 8230 is a shock-resistant single-phase power quality analyser that measures and carries out diagnostic work and power quality work on single-phase systems or three-phase balanced low-voltage networks.
PS: Thermal imagers
01 July, 2008 | Supplied by: Fluke Australia Pty Ltd
The TiR1 and TiR thermal imagers are designed for use in building restoration and inspection applications.
EX 800 series clamp multimeter
01 July, 2008 | Supplied by: Extech Instruments
The EX 800 series clamp multimeter combines a 1000 A clamp meter with a non-contact infrared thermometer guided by a laser pointer.
Power meters
01 July, 2008 | Supplied by: Schneider Electric
The PowerLogic PM800 series of power meters is designed to reduce energy costs by helping users understand where and how energy is used, extend equipment life, improve power system reliability and reduce downtime by monitoring, troubleshooting and preventing power quality issues.
Megger digital earth resistance testers
01 July, 2008 | Supplied by: Megger Limited
The Megger range of digital earth resistance testers has been extended to include a model powered from rechargeable batteries and versions with variable test frequency.
Plug-and-go MPO fibre connectivity system
16 June, 2008 | Supplied by: http://www.ampnetconnect.com.au
The AMP NETCONNECT MPO connector system is a complete end-to-end optical fibre solution supporting 10 Gigabit ethernet. It is a pre-terminated, plug-and-play optical fibre cabling platform designed specifically for data centre and backbone cabling applications.
Optical fibre analyser
01 June, 2008 | Supplied by: AFL Telecommunications Australia Pty Ltd
The OPT-WA-100 is a 16-channel wavelength analyser that is designed to measure both wavelength and optical power or multi wavelength optical signals in WDMA, CWDM-PON and WDM-PON systems that use multiple optical carriers with different wavelengths.
Powered process indicator
01 June, 2008 | Supplied by: Innovec Controls Pty Ltd
The DI4WP is a powered process indicator mounted in an IP67-rated surface mounting weatherproof enclosure that accepts standard process signals of 4-20 mA and 0-10 VDC.
Power supply tester
01 June, 2008 | Supplied by: Westek Electronics Pty Ltd
The Prodigit 3610C combination DC load/voltage source is designed to test power supplies including chargers, adapters, linear devices, SMPSs and other devices with a DC output.
Fluke Ti Series thermal imaging solutions
01 June, 2008 | Supplied by: Fluke Australia Pty Ltd
Fluke has expanded its range of thermal imagers with the addition of the Ti25 and Ti10 models, which provide comprehensive thermal imaging solutions for everyday troubleshooting and maintenance of electromechanical equipment, electrical installations, process equipment, HVAC/R equipment and other industrial and electrical equipment.
Power measurement
01 June, 2008 | Supplied by: Siemens Ltd
The Sentron PAC3200 is a combination power measuring and monitoring device, designed as a replacement for conventional analog display instruments.
