Thermal imager software upgrade
01 February, 2008 | Supplied by: Fluke Australia Pty Ltd
An upgraded version of InsideIR software is available as a free download to Fluke Ti20 and Ti30 thermal imager users at http://us.fluke.com/usen/support/software.
InfraCAM infrared thermal imager
01 February, 2008 | Supplied by: Teledyne FLIR
The InfraCAM infrared thermal imager range has been improved to provide more image storage, better image quality and more post-processing capabilities. It is designed to detect hot spots, avoid electrical failures, increase safety and even prevent fires.
Programmable power source
01 February, 2008 | Supplied by: Westek Electronics Pty Ltd
The California Instruments EC1000S 1 kVA AC and DC power supply is a comprehensive power source and test system that includes measurement and harmonic analysis of output current.
DC current sensors
01 February, 2008 | Supplied by: Practical Control Solutions
The CYHCT-C2E range of open loop Hall effect current transducers are designed for DC current measurement with ranges from 300 to 1000 A. Typical applications include uninterruptible power supplies, welders, electroplating rectifiers and DC drive systems.
Fluke 1621 earth ground tester
01 February, 2008 | Supplied by: Fluke Australia Pty Ltd
The Fluke 1621 is an earth ground tester which provides basic ground testing methods with a simple user interface and intuitive functionality. It is a basic entry-level tester that complements Fluke’s 162x range of earth ground testers.
SL1000 data acquisition system
01 February, 2008 | Supplied by: Yokogawa Australia Pty Ltd
The SL1000 high-speed data acquisition unit uses the same input modules from the Yokogawa DL750/SL1400 family of portable ’scope-corders’ and adds a high-speed module with optical isolation and inputs up to 1 kV.
Megger S1 series high-voltage insulation testers
29 January, 2008 | Supplied by: Megger Limited
The S1-554 and S1-1054 high-voltage insulation testers deliver accurate readings even in noisy electrical environments, such as substation switchyards, using 4 mA noise rejection and hardware and software filtering.
Thermal imager with data logging
29 January, 2008 | Supplied by: Emona Instruments Pty Ltd
The Electrophysics HotShot thermal imaging camera has an in-built PDA-type touch screen and Qwerty keyboard for data logging functions.
Fluke digital logging multimeters
29 January, 2008 | Supplied by: Fluke Australia Pty Ltd
The Fluke 287 and 289 logging multimeters with true-rms and TrendCapture are high-accuracy logging digital multimeters designed with advanced features for electrical, electronics and industrial professionals.
Loop testers
28 January, 2008 | Supplied by: Megger Limited
The LTW300 earth loop impedance testers enable two-wire loop tests with no risk of tripping 30 mA RCDs, even where electronic RCDs are used. The testers are three-phase safe and category IV 300 V rated, making them suitable for use on supplies from 50 VAC single phase to 440 V three-phase installations.
Temperature calibrators
17 December, 2007 | Supplied by: Heastern Industries
The FTK series non-contact infrared temperature calibration checkers ensure infrared temperature sensors are operating within calibration limits on the shop floor.
Portable infrared cameras
28 November, 2007 | Supplied by: Teledyne FLIR
The ThermaCAM T360, T400, B360 and B400 range is the latest generation of portable infrared cameras, designed as a replacement for the E-Series of infrared cameras to detect and measure heat which develops in electrical, electronic or mechanical applications.
Expedited mapping and damage assessment
28 November, 2007 | Supplied by: http://www.dulhunty.com
Surveylab has available ike 304, a new category of rapid GIS data capture device.
IR thermal camera
28 November, 2007 | Supplied by: Teledyne FLIR
The ThermaCAM P640 is a handheld infrared camera with an uncooled infrared detector that is claimed to produce higher quality images of 640 x 480 array than standard 320 x 240 arrays, enabling users to be twice as far away from the subject - for added safety - and still measure accurately.
Electrician's testing kit
28 November, 2007 | Supplied by: RS
The Fluke Electrician's Combo Kit is designed as a comprehensive solution to meet the needs of electrical professionals for use in the field to test electrical installations.The kit includes the Fluke 117 True-RMS digital multi-meter with non-contact voltage detection, Fluke 322 compact clamp meter, 4 mm lantern tip probe, test lead set and ToolPak magnetic meter hanging strap, all in a durable soft carrying case with shoulder strap for protection and easy meter transportation.
