Dali TE thermal imaging camera
31 August, 2009 | Supplied by: Emona Instruments Pty Ltd
The Dali TE is a 160 x 120 resolution thermal imaging camera with a temperature range of -20 to +250 °C and a laser pointer. It is suitable as a service tool for everyday electrical, industrial and HVAC applications.
Non-contact infrared temperature sensor
31 August, 2009 | Supplied by: OneTemp Pty Ltd
The PyroUSB sensor connects directly to a PC via a USB cable and operates without the need for any additional hardware or power supply. It displays temperature in numerical format and on a simulated scrolling chart. Users can set the temperature range and emissivity, compensate for reflected energy, apply filtering to fluctuating temperatures and use peak or valley-hold processing to measure hot or cold objects on conveyors.
CM605 multifunction clamp-on meter
31 August, 2009 | Supplied by: AEMC Instruments
The CM605 multifunction clamp-on meter is designed for measuring 420 mA process signals, as well as the higher currents (up to 100 A) associated with general electrical and industrial monitoring and troubleshooting.
Digital ohmmeter
01 August, 2009 | Supplied by: TechRentals
The Megger DLRO 10X Microhmmeter has been introduced into TechRentals’ rental fleet.
Handheld digital multimeter
09 July, 2009 | Supplied by: Yokogawa Australia Pty Ltd
The TY700 series of handheld digital multimeters features a basic accuracy of 0.020% and 50,000 count dual display with a 51-segment bar graph, true RMS measurement and simultaneous measurement and display of DC and AC, closed-case calibration, and data management support via logging-mode memory, logging software and IR USB communication.
DC current transmitter
09 July, 2009 | Supplied by: Practical Control Solutions
The CYHCT-S4 range of Hall effect transmitters is designed for the measurement of DC current.
MIT30 high-voltage insulation tester
09 July, 2009 | Supplied by: Megger Limited
The MIT30 high-voltage insulation tester is housed in a rugged case (IP67 rated when closed and IP52 rated when in use), designed for field use in acceptance and maintenance testing of switchgear and transformers.
P660 handheld infrared camera
09 July, 2009 | Supplied by: Teledyne FLIR
The P660 is a high-resolution handheld infrared camera with a high-resolution 640 x 480 pixel detector with thermal sensitivity of 45 mK.
Fluke Ti40FT and Ti45FT thermal imagers
09 July, 2009 | Supplied by: Fluke Australia Pty Ltd
The Ti40FT and Ti45FT thermal imagers are designed for use in a wide variety of thermography tasks.
Transmitter for temperature monitoring
09 July, 2009 | Supplied by: Emerson
The Rosemount 848T wireless temperature transmitter for high-density temperature measurement is an expansion to the Smart Wireless solutions.
Reporting software for digital multimeters
08 July, 2009 | Supplied by: Fluke Australia Pty Ltd
The enhanced Version 3.4 of FlukeView Forms provides analysis and reporting software for digital multimeters and other test instruments.
Universal relay tester
08 July, 2009 | Supplied by: Power Parameters Pty Ltd
The Ponovo T200A Universal Tester is suitable for testing various types of protection relays including instantaneous, extreme inverse, inverse, electrodynamic and numerical relays such as distance, impedance, directional ground, differential, power flow, frequency and power factor.
Industrial electrical and automation testers
08 July, 2009 | Supplied by: Fluke Australia Pty Ltd
The ScopeMeter 225C and 215C test tools perform verification of electrical signal quality on industrial buses like Fieldbus, CANbus, Profibus and Modbus.
Clamp meters
08 July, 2009 | Supplied by: Extech Instruments
The EX600 series of true RMS clamp meters features an IR thermometer for locating hot spots and NCV, making it an all-in-one solution for both electrical and HVAC professionals.
Kyoritsu digital multimeter range
08 July, 2009 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The Kyoritsu digital multimeter range comprises four models: 1051, 1052, 1061 and 1062 and features colour-coded range selection switches and function buttons for ease of use.
