SafeTcheck Pro Logger II portable appliance tester
01 August, 2008 | Supplied by: TRIO Test & Measurement
The SafeTcheck Pro Logger II is an electrical portable appliance tester (PAT), designed and manufactured in Australia. The tester ensures the electrical safety of appliances complies with the requirements of the current Australian and New Zealand Standard AS/NZS3760 (In-service safety inspection and testing of electrical equipment).
MIT and S1 insulation testers
01 August, 2008 | Supplied by: Megger Limited
The MIT and S1 insulation testers have been enhanced so that they now meet the requirements for use in CAT IV 600 V applications. This makes them suitable for performing measurements at the source of supply in low-voltage installations and offer immunity to high-voltage transients up to 8 kV.
48-port Hi-D 'Plug&Go' patch panel
16 July, 2008 | Supplied by: http://www.ampnetconnect.com.au
AMP Netconnect's MRJ21 is a 48-port 1U Hi-D 'Plug&Go' patch panel.
EX 800 series clamp multimeter
01 July, 2008 | Supplied by: Extech Instruments
The EX 800 series clamp multimeter combines a 1000 A clamp meter with a non-contact infrared thermometer guided by a laser pointer.
Power quantity analyser
01 July, 2008 | Supplied by: AEMC Instruments
The PowerPad Jr model 8230 is a shock-resistant single-phase power quality analyser that measures and carries out diagnostic work and power quality work on single-phase systems or three-phase balanced low-voltage networks.
PS: Thermal imagers
01 July, 2008 | Supplied by: Fluke Australia Pty Ltd
The TiR1 and TiR thermal imagers are designed for use in building restoration and inspection applications.
Power meters
01 July, 2008 | Supplied by: Schneider Electric
The PowerLogic PM800 series of power meters is designed to reduce energy costs by helping users understand where and how energy is used, extend equipment life, improve power system reliability and reduce downtime by monitoring, troubleshooting and preventing power quality issues.
Megger digital earth resistance testers
01 July, 2008 | Supplied by: Megger Limited
The Megger range of digital earth resistance testers has been extended to include a model powered from rechargeable batteries and versions with variable test frequency.
Plug-and-go MPO fibre connectivity system
16 June, 2008 | Supplied by: http://www.ampnetconnect.com.au
The AMP NETCONNECT MPO connector system is a complete end-to-end optical fibre solution supporting 10 Gigabit ethernet. It is a pre-terminated, plug-and-play optical fibre cabling platform designed specifically for data centre and backbone cabling applications.
Multifunction measuring device
01 June, 2008 | Supplied by: Siemens Ltd
The Sentron PAC3200 is a power measuring and monitoring device combined into one single product, designed to be a replacement for conventional analog display instruments.
Power supply tester
01 June, 2008 | Supplied by: Westek Electronics Pty Ltd
The Prodigit 3610C combination DC load/voltage source is designed to test power supplies including chargers, adapters, linear devices, SMPSs and other devices with a DC output.
Infrared calibrators
01 June, 2008 | Supplied by: Fluke Australia Pty Ltd
The Hart Scientific 4180 and 4181 precision infrared calibrators are designed to ensure the optimum accuracy of temperature recorders and thermometers.
Powered process indicator
01 June, 2008 | Supplied by: Innovec Controls Pty Ltd
The DI4WP is a powered process indicator mounted in an IP67-rated surface mounting weatherproof enclosure that accepts standard process signals of 4-20 mA and 0-10 VDC.
Fluke Ti Series thermal imaging solutions
01 June, 2008 | Supplied by: Fluke Australia Pty Ltd
Fluke has expanded its range of thermal imagers with the addition of the Ti25 and Ti10 models, which provide comprehensive thermal imaging solutions for everyday troubleshooting and maintenance of electromechanical equipment, electrical installations, process equipment, HVAC/R equipment and other industrial and electrical equipment.
Power measurement
01 June, 2008 | Supplied by: Siemens Ltd
The Sentron PAC3200 is a combination power measuring and monitoring device, designed as a replacement for conventional analog display instruments.
