Testo 881 thermal imager
22 April, 2010 | Supplied by: Testo Pty Ltd
The testo 881 thermal imager enables facilities such as electrical swithchboards to be tested completely damage free, thereby identifying problems before malfunctions or fire risks occur.
Fluke 6105A and 6100B electrical power standards
22 April, 2010 | Supplied by: Fluke Australia Pty Ltd
The Fluke 6105A and 6100B electrical power standards are designed to deliver stable, precise reference power and energy for use in calibrating electrical measurement equipment in instrument service and calibration, electrical manufacturing and power utility applications.
Megger TDR 2000
22 April, 2010 | Supplied by: TechRentals
The Megger TDR 2000 is available for rental from TechRentals to perform single- and dual-channel measurements on a wide range of metallic cables.
Omicron CPC 100 PTS protection relay testing system
11 March, 2010 | Supplied by: http://www.techrentals.com.au
The Omicron CPC 100 protection relay testing system, now available for rent, is a suitable instrument for automated testing of power transformers, current transformers (CTs) and voltage transformers (VTs) and resistance testing.
Megger FRAX sweep frequency response analysers
19 February, 2010 | Supplied by: Megger Limited
The FRAX sweep frequency response analyser reveals potential electrical and mechanical problems in power transformers, many of which are not detectable using other methods.
Emerson Rosemount TankRadar Rex and Pro tank gauging system
19 February, 2010 | Supplied by: Emerson
The Rosemount TankRadar Rex and Pro tank gauging system now include Smart Wireless functionality, enabling the radar-based systems to be installed in storage-tank farms without the need to install signal wiring. Applications include refineries and bulk liquid storage plants for LPG, LNG, gasoline, crude oils and asphalt.
Megger MTO210 dual-channel ohmmeter
19 February, 2010 | Supplied by: Megger Limited
The MTO210 transformer ohmmeter safely and accurately measures the DC resistance of all types of magnetic windings in on-site and workshop situations. It can also be used to check the operation of on-load tap changers, a common cause of transformer problems.
Mastering the maintenance process: thermography saves Eaton Group a quarter of a million dollars per year
10 February, 2010 | Supplied by: Teledyne FLIR
Preventive maintenance is not just a matter of organisation: it also requires knowledge and the efficient handling of gathered information. A suitable thermal imaging camera helps in both of these areas, with an impact which makes itself abundantly clear in the cost-benefit analysis.
FLIR Systems ThermaCAM P640 infrared camera boosts Dutch building advisor company service offerings
10 February, 2010 | Supplied by: Teledyne FLIR
Infrared cameras expand the range of services offered by building sector specialists and allow them to better serve their customer groups. Using an infrared camera, suitable for building applications, before and/or after every building valuation, transaction or major HVAC repair maximises value and minimises costs.
Emona Instruments CableEye cable test systems
05 February, 2010 | Supplied by: Emona Instruments Pty Ltd
The CableEye range of PC-based cable test systems, from CAMI Research, covers basic electrical continuity measurement, continuity measurement with resistance and high-voltage testing.
AEMC Instruments Simple Logger II Model ML912
05 February, 2010 | Supplied by: AEMC Instruments
The Simple Logger II Model ML912 is a two-channel, AC current recording device that incorporates two user-selectable measurement ranges of 0.5-100 and 5-1000 A.
Quadtech Guardian 6100 Plus safety analyser
16 December, 2009 | Supplied by: Power Parameters Pty Ltd
The Quadtech Guardian 6100 Plus safety analyser is suitable for electrical products safety and compliance testing to the requirements of UL, CSA, IEC/EN, TUV and other specifications.
The smart buyer’s guide to test and measurement equipment
01 December, 2009
Unfortunately, many people base their test and measurement equipment purchasing decision on price, availability and misleading sales information.
Six simple ways to reduce costs with power quality analysers
01 December, 2009 | Supplied by: Fluke Australia Pty Ltd
There are literally hundreds of power quality measurements that can be taken on electrical systems and equipment. Predictive maintenance measurements and power consumption measurements can help electrical contractors uncover hidden costs for their end-user customers, protect their equipment from damaging conditions, reduce their unscheduled downtime and improve the system’s overall performance.
SebaKMT ground penetrating radar
12 November, 2009 | Supplied by: http://www.techrentals.com.au
TechRentals has introduced the SebaKMT Ground Penetrating Radar (GPR) into their extensive test and measurement rental fleet.
