Automation, security and control

ELC programmable logic controller

01 September, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd

The ELC programmable logic controller is designed to suit control applications of 40 I/Os and less, although it can also be expanded up to 256 I/Os. That way, there is no need to change to a different controller as I/Os need to be expanded.


IP65-rated control bezel

01 September, 2008 | Supplied by: Soanar Limited

The Wincomm IP65-rated stainless steel bezels provide protection for factory automation and control and HMI equipment from water, cleaning materials and grease typically found in the food and pharmaceutical production industries.


Ethernet extension over copper

01 September, 2008 | Supplied by: Paqworks

The Westermo DDW-220 is designed to extend ethernet networks over existing copper cables in point-to-point or line sharing applications. Point-to-point transmission distances of up to 10 km can be achieved with data rates of 5.7 Mbps possible over shorter distances on a single copper pair.


LCD touch panels

01 September, 2008 | Supplied by: Midwich Australia

The Kortek touch-enabled LCDs are designed to meet the demands of 24/7/365 operations in a range of environments.


AC servomotors

01 September, 2008 | Supplied by: M Rutty & Co Pty Ltd

The Mavilor MA series of AC servomotors utilises an air gap design with small diameter and short length, which has a short mechanical time constant and extremely short electrical constant that provides high peak torque at high speed, making them suitable for control operations.


VSD with in-built PLC

27 August, 2008 | Supplied by: Mechtric Pty Ltd

The Delta VFD-e series AC motor drives offer advanced motor control with the added advantage of an in-built PLC. The PLC provides up to 500 program steps and is programmed in standard ladder logic using free software, making simple automation projects easily achieved.


Fibre-optic light source

03 August, 2008 | Supplied by: TechRentals

When the Kingfisher KI7827B optical light source with APC (angled physical connection) is used in conjunction with the KI7600 optical power meter, together they can test loss on singlemode optical fibre systems.


Embeddable presence sensors

01 August, 2008 | Supplied by: Micromax Pty Ltd

The Banner Engineering M-GAGE wireless sensor node for vehicle sensing is encapsulated in an IP67-rated enclosure and accompanied by a long-lasting FlexPower battery, which supplies power for both sensing and wireless connectivity for up to 10 years.


Embedded ethernet switch

01 August, 2008 | Supplied by: Metromatics Pty Ltd

GE Fanuc Intelligent Platforms has released the Neternity RM921, a family of layer 2/3+ managed ethernet embedded switches with full IPv6 wire speed switching and routing and featuring OpenWare switch management.


Internet-linked safety I/O

01 August, 2008 | Supplied by: Rockwell Automation Australia

The CompactBlock Guard I/O on EtherNet/IP series are safety I/O modules equipped with EtherNet/IP connectivity. The 1791ES-IB16 and the 1791ES-IB8XOBV4 modules allow users to streamline network architectures by employing industry-standard EtherNet/IP protocol for all safety, standard and motion control communications.


Octopus IP67 ethernet switches

01 August, 2008 | Supplied by: Daanet Pty Ltd

Hirschmann Automation & Control has added three IP67 switches of the Octopus series to its range. These switches have 8 or 16 twisted-pair ports (100 BASE TX) or 14 twisted pair and two fibre-optic uplink ports (100 BASE FX).


Industrial LCD module

01 August, 2008 | Supplied by: Soanar Limited

The NEC LCD Technologies NL8048BC19-02 module is a 7" TFT LCD with WVGA resolution, 50,000 h claimed life and white LED backlighting.


Industrial PC interface

01 August, 2008 | Supplied by: Siemens Ltd

Siemens has equipped its industrial PC family with a Profinet interface. Designed as a 3-port switch, the interface supports isochronous real time and integrates into Profinet networks.


Santerno Sinus variable speed drives

01 August, 2008 | Supplied by: NHP Electrical Engineering Products Pty Ltd

Santerno’s Sinus range of flux vector drives are suitable for all industry segments, and have power ratings from 0.4 to 2000 kW and supply voltages up to 690 VAC.


Safety relay contact blocks

01 August, 2008 | Supplied by: Jemtech Pty Ltd

Utilising reliable 6 A dual redundant and forcibly guided relays, the Jemtech PA-X11 safety relay contact block is designed for use in safety systems and light curtain installations as well as relay outputs for light curtains.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd