Embedded ethernet switch
01 August, 2008 | Supplied by: Metromatics Pty Ltd
GE Fanuc Intelligent Platforms has released the Neternity RM921, a family of layer 2/3+ managed ethernet embedded switches with full IPv6 wire speed switching and routing and featuring OpenWare switch management.
Industrial I/Os
01 August, 2008 | Supplied by: Rockwell Automation Australia
The high-density Compact I/O modules are additions to the Allen-Bradley range of industrial I/Os including analog, digital and ASCII modules that accommodate various applications while conserving panel space. Providing improved installation and operational flexibility, the modules are compatible with the CompactLogix and MicroLogix control platforms.
h3 series stepper motors
01 August, 2008 | Supplied by: M Rutty & Co Pty Ltd
The updated version of the h3 series of Portescap step motors is claimed to provide 25+% more torque output across the entire speed range compared with the original h3 models.
Octopus IP67 ethernet switches
01 August, 2008 | Supplied by: Daanet Pty Ltd
Hirschmann Automation & Control has added three IP67 switches of the Octopus series to its range. These switches have 8 or 16 twisted-pair ports (100 BASE TX) or 14 twisted pair and two fibre-optic uplink ports (100 BASE FX).
Industrial PC interface
01 August, 2008 | Supplied by: Siemens Ltd
Siemens has equipped its industrial PC family with a Profinet interface. Designed as a 3-port switch, the interface supports isochronous real time and integrates into Profinet networks.
New intruder alarm and CCTV standards
23 July, 2008
SAI Global has released the latest intruder alarm and CCTV Australian Standards — AS/NZS 2201.5:2008 'Intruder alarm systems — Alarm transmission systems’ and AS 4806.4 — 2008 ‘Closed circuit television (CCTV) — Remote video’.
In-monitor display LCD panels
01 July, 2008 | Supplied by: Midwich Australia
The Marshall Electronics IMD LCD panels with in-monitor display functionality are designed for video-production houses, broadcasters and mobile units, providing an ‘all-in-one’ solution that allows information to be displayed on screen.
Motor and gearbox combination
01 July, 2008 | Supplied by: M Rutty & Co Pty Ltd
The Portescap ironless Mu 915L-61 series motor and gearbox combination is claimed to offer the power, performance and reliability that is required in medical applications.
Wireless power control
01 July, 2008 | Supplied by: Micromax Pty Ltd
The Banner Engineering FlexPower wireless nodes are designed to enable Banner SureCross monitoring and control systems to operate using 10-30 VDC line power, solar panels or battery modules in remote or difficult-to-access locations.
3D projector
01 July, 2008 | Supplied by: Amber Technology Limited
The F10 AS3D single-chip DLP SXGA+ projector from projectiondesign is a portable high-resolution active 3D stereoscopic projector, designed for the demanding visualisation and simulation environments such as research centres and universities.
Failsafe manual reset thermostats
01 July, 2008 | Supplied by: Practical Control Solutions
The KMF series of failsafe thermostats monitor temperatures in furnaces, ovens, kilns, boilers or any application where an over-temperature condition would result in a critical failure.
‘Invisible’ speakers
01 July, 2008 | Supplied by: QualiFi Pty Ltd
The Stealth Acoustics X series of ‘invisible’ flat-front speakers is designed for in-wall or ceiling installation for home theatre and distributed audio systems, where the speakers are indistinguishable from the wall surface.
Video intercom
01 July, 2008 | Supplied by: i-Lifestyle
The Siedle Vario in-home video intercom system bus can now perform functions previously only available using high-end intercom installation system.
Home climate controller
01 July, 2008 | Supplied by: Legrand Australia P/L
The Bticino Light Tech NT4442 room thermostat controller can be interconnected with both heating and air conditioning systems for convenient climate control within a home.
Wall plate with thermostat
01 July, 2008 | Supplied by: i-Lifestyle
The expanded Berker TS Sensor can be used to control additional room-based KNX/EIB control functions such as heating, air conditioning or ventilation. This version features an integrated temperature sensor and built-in bus coupling unit, so no additional push-button interfaces are required.
