Automation, security and control

Lighting/building automation gateway

01 January, 2009 | Supplied by: Philips Dynalite

The 100BT ethernet gateway series of 10/100 Base-T ethernet interfaces permits ethernet connectivity between Dynalite’s DyNet peer-to-peer communications serial bus network and third-party technologies, such as audiovisual and building automation systems.


DIN rail-mountable energy controller

01 January, 2009 | Supplied by: Philips Dynalite

The DDMC802GL is a multipurpose controller designed for home automation and hotel suite control applications.


Relay output module

01 December, 2008 | Supplied by: Interworld Electronics and Computer Industries

The USB-IDIO series of USB 2.0 relay output devices are designed to add isolated input and solid-state output capabilities to any computer with a USB port.


Non-cogging AC servomotor

01 December, 2008 | Supplied by: M Rutty & Co Pty Ltd

The non-cogging MLL series of AC servomotors has no teeth in the stators, so there is no reluctance variation in the 360° motor rotation.


High-efficiency motors

01 December, 2008 | Supplied by: ABB Australia Pty Ltd

A range of low-voltage AC motors has been launched with improved energy efficiency and life cycle values over the ABB models they replace.


Motor starter module

01 December, 2008 | Supplied by: Turck Australia Pty Ltd

The BL20 motor starter economy module enables daisy-chain connection from a single I/O module to up to 48 motor starters via a ribbon cable on a single fieldbus node.


Compact operator panel

01 December, 2008 | Supplied by: Siemens Ltd

The Simatic HMI TP 177B is a widescreen-format operator panel that expands the 170 family of panels, notable for their compact format and a visualisation screen.


Hazardous area motor starters

01 December, 2008 | Supplied by: NHP Electrical Engineering Products Pty Ltd

The Stahl DOL electrical motor starters are a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.


Industrial HMI

01 December, 2008 | Supplied by: Rockwell Automation Australia

The Allen-Bradley PanelView Component operator interface is a human machine interface (HMI) designed for industrial applications.


Venetian blind drives

01 December, 2008 | Supplied by: M Rutty & Co Pty Ltd

The Dunkermotoren Venetian blind motors are AC induction motors for short-time-operation with mounted gear boxes.


Timing module

01 December, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd

The Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs.


MSS series DC servomotor

01 December, 2008 | Supplied by: M Rutty & Co Pty Ltd

The Mavilor MSS series servomotors are claimed to provide a 20% increase in power-to-weight and volume ratios and a 20% increase in power rate and acceleration capability over previous designs.


Open-frame industrial monitors

01 December, 2008 | Supplied by: Interworld Electronics and Computer Industries

The OPD Series of open-frame industrial monitors has been expanded through the latest OPD-11x6 Series TFT LCDs.


Intelligent batch controller

01 December, 2008 | Supplied by: Innovec Controls Pty Ltd

The IBC is an intelligent batch controller with an 8-digit 14 mm character height LED display. All functions of the instrument are programmable from the front panel by touch buttons with tactile feedback. Variables are stored in non-volatile memory.


Industrial automation servomotors

01 December, 2008 | Supplied by: M Rutty & Co Pty Ltd

The Dunkermotoren BG75 servomotors provide intelligent drives for drive solutions including industrial automation, with outputs of up to 500 W and 5 Nm.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd