Unmanaged industrial ethernet switches
01 August, 2008 | Supplied by: Daanet Pty Ltd
Hirschmann’s Spider range of unmanaged industrial ethernet switches has been expanded to include nearly every port configuration possible up to eight ports, enabling cost-effective solutions to be implemented - from a 2-port fibre transceiver, to a 3-port TAP (for ‘daisy-chain’ applications) and a 4- or 8-port switch with or without fibre.
Embedded ethernet switch
01 August, 2008 | Supplied by: Metromatics Pty Ltd
GE Fanuc Intelligent Platforms has released the Neternity RM921, a family of layer 2/3+ managed ethernet embedded switches with full IPv6 wire speed switching and routing and featuring OpenWare switch management.
Stepper drive with AC mains supply
01 August, 2008 | Supplied by: Automated Motion Systems Pty Ltd
The RTA XMind-B6 stepper drive is powered by direct connection to 240, 220 or 110 VAC. When using a 240 VAC supply, this provides a 325 VDC motor supply rail which is suitable for high speed and acceleration.
Internet-linked safety I/O
01 August, 2008 | Supplied by: Rockwell Automation Australia
The CompactBlock Guard I/O on EtherNet/IP series are safety I/O modules equipped with EtherNet/IP connectivity. The 1791ES-IB16 and the 1791ES-IB8XOBV4 modules allow users to streamline network architectures by employing industry-standard EtherNet/IP protocol for all safety, standard and motion control communications.
Embeddable presence sensors
01 August, 2008 | Supplied by: Micromax Pty Ltd
The Banner Engineering M-GAGE wireless sensor node for vehicle sensing is encapsulated in an IP67-rated enclosure and accompanied by a long-lasting FlexPower battery, which supplies power for both sensing and wireless connectivity for up to 10 years.
h3 series stepper motors
01 August, 2008 | Supplied by: M Rutty & Co Pty Ltd
The updated version of the h3 series of Portescap step motors is claimed to provide 25+% more torque output across the entire speed range compared with the original h3 models.
Industrial PC interface
01 August, 2008 | Supplied by: Siemens Ltd
Siemens has equipped its industrial PC family with a Profinet interface. Designed as a 3-port switch, the interface supports isochronous real time and integrates into Profinet networks.
Santerno Sinus variable speed drives
01 August, 2008 | Supplied by: NHP Electrical Engineering Products Pty Ltd
Santerno’s Sinus range of flux vector drives are suitable for all industry segments, and have power ratings from 0.4 to 2000 kW and supply voltages up to 690 VAC.
Safety relay contact blocks
01 August, 2008 | Supplied by: Jemtech Pty Ltd
Utilising reliable 6 A dual redundant and forcibly guided relays, the Jemtech PA-X11 safety relay contact block is designed for use in safety systems and light curtain installations as well as relay outputs for light curtains.
Industrial LCD module
01 August, 2008 | Supplied by: Soanar Limited
The NEC LCD Technologies NL8048BC19-02 module is a 7" TFT LCD with WVGA resolution, 50,000 h claimed life and white LED backlighting.
New intruder alarm and CCTV standards
23 July, 2008
SAI Global has released the latest intruder alarm and CCTV Australian Standards — AS/NZS 2201.5:2008 'Intruder alarm systems — Alarm transmission systems’ and AS 4806.4 — 2008 ‘Closed circuit television (CCTV) — Remote video’.
BG42 and BG45 brushless DC motors
01 July, 2008 | Supplied by: M Rutty & Co Pty Ltd
The Dunkermotoren range of brushless DC motors has been expanded with the release of the BG42 and BG45 models, designed for use in industrial automation and medical applications.
3D projector
01 July, 2008 | Supplied by: Amber Technology Limited
The F10 AS3D single-chip DLP SXGA+ projector from projectiondesign is a portable high-resolution active 3D stereoscopic projector, designed for the demanding visualisation and simulation environments such as research centres and universities.
Home climate control
01 July, 2008 | Supplied by: Clipsal - by Schneider Electric
The C-Bus air-conditioning thermostats are simple to use and are designed to complement Clipsal Saturn wall switches.
Wireless power control
01 July, 2008 | Supplied by: Micromax Pty Ltd
The Banner Engineering FlexPower wireless nodes are designed to enable Banner SureCross monitoring and control systems to operate using 10-30 VDC line power, solar panels or battery modules in remote or difficult-to-access locations.
