AEMC digital FlexProbe 400D and 4000D current measurement
31 January, 2013AEMC has released the Digital FlexProbe series for TRMS AC current measurements. The devices are rated at 600 V CAT IV and provide a solution for accessing electrical conductors in tight places.
Beamex MC2-IS multifunction calibrator
31 January, 2013The ATEX and IECEx certified 2nd generation of the Beamex MC2-IS intrinsically safe (IS) multifunction calibrator is a practical tool designed for field calibration and testing in explosive environments.
LOVATO Electric DME modular energy meters
24 January, 2013The LOVATO Electric DME modular energy meters provide a solution for the measurement and analysis of energy consumption to control energy usage throughout buildings and manufacturing plants. Two single-phase versions can be connected directly to systems with rating up to 40 or 63 A. Two three-phase versions are available, one with direct 63 A current and the other with current transformer connection.
High Voltage Inc PFT series portable AC Hipot test set
24 January, 2013The High Voltage Inc PFT Series Portable AC Hipot Test Set is well suited for testing vacuum bottles and interrupters, switch gear, overhead apparatus, bus ducts, motorised vacuum switches and more. The capacitive load compensation enables full load testing with a power draw of 1.5 kVA while operating from a conventional line output. The device is available to rent.
Vitrek V7X Hi-Pot testers
17 January, 2013The Vitrek V7X Hi-Pot testers and ground bond testers are designed for safety tests in accordance with IEC, TUV, CSA and UL regulations. Two models in the Vitrek V7X Hi-Pot testers range include insulation resistance measurement between 20 and 5000 VDC, and all models feature resistance measurement to 60 kΩ with a resolution to 0.001 Ω.
Hioki CT9667 flexible clamp-on sensor
21 December, 2012The Hioki CT9667 flexible clamp-on sensor (Rogowski coil) available from Power Parameters includes a secure and easy-to-lock closing mechanism, permitting easy looping around conductors, even in very confined conditions.
Hioki UTD1025CL digital handheld oscilloscope
20 December, 2012The Hioki UNI-T model UTD1025CL digital handheld oscilloscope from Power Parameters is battery operated with a 64k colour, 9 cm TFT display. The instrument has a 25 MHz bandwidth and a 200 MS/s sampling rate, capable of accurately measuring signals with rise times down to 14 ns.
Michell Instruments MIC0010-RH and temperature measurement
10 December, 2012Maintaining reliable RH measurements in harsh or corrosive environments is notoriously difficult as the conditions themselves degrade the sensors and equipment, often in short time periods. Michell Instruments’ DT722 RH and temperature transmitter provides a solution to this problem.
Narda NIM-511 and NIM-513 electric and magnetic field meters
06 December, 2012The NIM-511 and NIM-513 industrial field meters from Narda are handheld measuring systems consisting of a basic unit and a measuring probe equipped with electric and magnetic field sensors. They provide a solution for the task of checking the compliance of industrial plant with regulations and limit values for electromagnetic radiation.
Megger MTO330 Automated Six-Winding Transformer Ohmmeter
27 November, 2012Available to rent, the Megger MTO330 Automated Six-Winding Transformer Ohmmeter provides full eight-terminal measurement capability to verify factory test readings. It helps locate defects in transformers with contact resistance in terminal connections and tap changers, and will also check the operation of on-load tap changers.
Fluke CNX wireless testing system
15 November, 2012Fluke has introduced the CNX Wireless System, a set of test tools that wirelessly connect multiple measurement modules and send simultaneous readings to a master device up to 20 m away. The rugged, customisable tool set lets users choose various measurement modules based on their specific troubleshooting scenario.
Hioki FT6380 clamp-on earth tester
09 October, 2012The Hioki FT6380 clamp-on earth tester measures grounding wire-earth resistance using dual, super-slim clamp-on technology. The clamp-on system injects accurate testing voltage in ground wires with simultaneous measurement of current and calculation of ground resistance and rejects external magnetic fields, even to 400 A/m field strength.
Yokogawa CL420 clamp-on process meter
27 September, 2012The Yokogawa clamp-on process meter from Madison Test & Measurement is used for measuring control signals and process instrumentation.
Hioki CT6590 clamp-on sensor for AC/DC clamps
20 September, 2012The Hioki CT6590 clamp-on sensor for AC/DC clamps allows measurement of AC and DC currents to 2000 A as pure AC, pure DC, half-wave and full-wave rectified currents.
Tektronix THS3014 and THS3024 handheld oscilloscopes
18 September, 2012Tektronix has introduced the THS3014 and THS3024 handheld oscilloscopes, designed for field test and bench design applications. They are suitable for users requiring true portability and battery operation.
