Test and measurement > Electrical testing

Rigol DS4000 series digital oscilloscopes

18 April, 2012

The Rigol DS4000 series digital oscilloscopes feature 4 GS/s sampling, bandwidth from 100 to 500 MHz and 2 or 4 channels and the Rigol DSA-815 1.5 GHz spectrum analyser.


Testo launches webshop

26 March, 2012

Portable measuring instruments manufacturer Testo has launched an online shop, testoAUS, to make searching for measuring equipment easier.


Megger MIT1020 Diagnostic 10 kV insulation resistance tester

06 March, 2012

Available to rent, the Megger MIT1020 10 kV diagnostic insulation resistance tester can be used for testing and maintenance of high-voltage electrical equipment. The device meets IEEE 43-2000 recommendation to use 10 kV for motor windings rated above 12 kV.


Phoenix Contact EMpro measuring devices

29 February, 2012

Phoenix Contact has updated its range of EMpro measuring devices so they can be monitored and analysed remotely via a web interface. This is made possible by two ethernet communication modules with an integrated web server that allow measuring devices to be quickly and easily integrated into existing ethernet networks.


Megger MFT1825 multifunction tester

15 February, 2012

Megger has extended its range of multifunction testers with the MFT1825. The tester conducts all tests required to complete electrical certification for industrial, commercial and domestic fixed wiring installations.


Checks are vital after flooding

14 February, 2012

Master Electricians Australia has developed a flood repair fact sheet to make sure homeowners stay safe, following the recent floods.


AEMC Model 6290 micro-ohmmeter

03 February, 2012

The AEMC high-current Model 6290 micro-ohmmeter is a portable, microprocessor-controlled instrument. It can be used to accurately measure very low contact resistances with test currents up to 200 A.


The significance of True RMS

29 November, 2011 by

The rapid changes in technology have meant that methods previously used for testing equipment are no longer accurate in many cases. Because an electrician comes across new technology on a regular basis, not to have a True RMS (root mean square) meter can be compared to a boxer going into a fight with one arm tied behind his back. In this article, Phil Collins, Engineering Support Manager, Techtronics Australia, explains what True RMS (TRMS) is and how to find it.


Fluke Australia Compass for Pressure version 4.0 software

24 November, 2011 by

The Compass for Pressure version 4.0 software is a universal platform for all pressure calibration software needs. From piston gauges calibrating individual devices in the calibration lab to transfer standards characterising racks of sensors in production, the software lets calibration professionals advance from individual automated hardware components to a fully automated calibration system quickly without consuming internal engineering resources.


Agilent U1230 handheld digital multimeter range

17 November, 2011 by

The U1230 range of handheld digital multimeters provides features that simplify everyday tasks even when working in dark and noisy conditions.


Alicat Scientific ATEX-approved mass flow meters and mass flow controllers

15 November, 2011 by

Alicat Scientific’s ATEX-approved mass flow meters and mass flow controllers are approved for hazardous environment (-X) option and are designed to be used in environments where ignitable gases are present.


Fluke ScopeMeter 190 Series II 2-channel handheld oscilloscopes

04 November, 2011 by

The ScopeMeter 190 Series II 2-channel handheld portable oscilloscopes combine the power of a 2-channel oscilloscope with a 5000 count digital multimeter and paperless recording modes. The 2-channel models join the recently introduced 4-channel ScopeMeter 190 Series II models to create the first full line of high-performance portable oscilloscopes with two or four independently isolated input channels, sealed case and Cat III 1000 V/Cat IV 600 V safety rating.


BW Technologies GasAlertMicroClip confined space 4-gas detector

28 September, 2011

The BW Technologies GasAlertMicroClip confined space 4-gas detector has been added to the TechRentals test and measurement rental fleet.


Megger OTS80PB transformer oil tester

19 September, 2011

The Megger OTS80PB transformer oil tester monitors and maintains oil quality. This measurement indicates the presence or absence of contaminants such as water or conducting particles.


AMS Instrumentation KATflow clamp-on ultrasonic flow meters

15 September, 2011

The KATflow clamp-on ultrasonic flow meters work on the transit-time method. This is based on the principle that sound waves travelling with the flow will move faster than those travelling against it. The resulting difference in transit time is directly proportional to the flow velocity of the liquid and consequently to the volumetric flow rate.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd