FLIR CM55/57 Flexible Clamp Meters
25 June, 2015The FLIR Systems range of CM55/57 Flexible Clamp Meters is designed for electrical inspections, making it easier to take measurements around multiple conductors, crowded panels, tight switch gears, large bus bars and wire bundles.
Magellan Electronic Load battery bank tester
08 April, 2015The Magellan Electronic Load is a maintenance tool designed to test the integrity and working order of battery banks.
Megger DET4TCR2 4-pole earth tester kit
02 April, 2015The Megger DET4TCR2 kit is designed to measure soil resistivity, resistance of earth rods and other associated installations.
FW Bell 4190 gauss meter
27 March, 2015The FW Bell 4190 is a handheld, extremely low frequency (ELF) gauss meter designed to accurately measure magnetic fields generated by electrical equipment. It can be configured to display either gauss or tesla units.
ISA circuit breaker analyser
01 December, 2014The ISA CBA 1000 circuit breaker analyser, available to rent from TechRentals, is a complete solution for EHV, HV and MV circuit breaker testing.
TechRentals turns 40
17 November, 2014Test and measurement company TechRentals has turned 40 this year.
Fluke CertiFiber Pro SM optical loss test set
01 September, 2014Available to rent, the Fluke singlemode (CFP-SM) OLTS modules for the DSX-5000 measure fibre-optic attenuation, length and propagation delay. The device includes a built-in visible fault locator (VFL) and provides Tier 1 certification at 1310 and 1550 nm in 3 s. A set reference wizard ensures correct reference settings and eliminates negative loss errors.
Megger MIT1525 insulation resistance tester
01 August, 2014The Megger MIT1525 is a 15 kV insulation resistance tester (IRT) capable of resistance measurements up to 30 TΩ.
SATEC Model EM133 NMI-designed DIN rail energy meter
05 May, 2014SATEC (Australia) has introduced a multifunction, DIN rail-mounted electricity meter that complies with NMI Pattern approval requirements.
HV Diagnostics HVA90 90 kV VLF/DC test set
29 April, 2014Available to rent, the HV Diagnostics HVA90 test set has both VLF and DC test capabilities combined in one unit and is designed for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear, transformers, machines (IEEE 433), insulators and bushings.
Fluke CertiFiber pro optical loss test set
17 April, 2014Available to rent, the Fluke multimode (CFP-MM-ADD) OLTS modules for the DSX-5000 measure fibre-optic attenuation, length and propagation delay.
Merits of type testing
31 March, 2014Be it domestic, commercial or industrial applications, safe reliable power distribution is more than ever a critical requirement for modern-day living. Electrical faults and power disruption through faulty equipment, poor design, installation or lack of maintenance services can be catastrophic on life, property and enterprises. In this article, David Clark discusses the merits of type-testing switchboards.
Megger EZ-Thump 12 kV power cable fault locator
07 March, 2014The Megger EZ-Thump 12 kV power cable fault locator, available to rent from TechRentals, is suitable for HV testing and specialises in power cable fault finding.
Megger TDR2000 cable fault locator
05 March, 2014Available to rent, the Megger TDR2000 cable fault locator is capable of identifying and locating a wide range of faults on metallic cables. It has 11 fault location modes and a minimum resolution of 0.1 m, and a maximum range of 20 km at 0.9 VF and 16 km at 0.65 VF.
Fluke Networks DSX-5000 CableAnalyser
03 March, 2014Available to rent, the DSX-5000 CableAnalyser copper test solution enables testing and certification of twisted pair cabling for up to 10 Gb ethernet deployments.