McCrometer precision V-Cone steam-injection flow meter
29 August, 2011 byThe McCrometer precision V-Cone steam-injection flow meter supports enhanced oil recovery (EOR) technologies that produce heavy oil from demanding environments, such as shallow oil sands deposits and other challenging formations.
Megger DLRO wind turbine lightning protection test lead set
05 August, 2011Available to rent, the Megger DLRO wind turbine lightning protection test lead set measures the resistance of a lightning protection circuit between the wind turbine blades and the ground when used with the Megger Digital Low Resistance Ohmmeter.
FCI online demo with close-ups of ST100 series flowmeters
20 July, 2011An online demo featuring interactive close-ups of the ST100 series flowmeters from Fluid Components International (FCI) makes it easy to learn more about the new benchmark in process and plant gas flow measurement, combining flow sensing performance with feature and function-rich electronics.
Megger MTO210 transformer ohmmeter
29 June, 2011Available to rent, the Megger MTO210 transformer ohmmeter can be used to measure the DC resistance of all types of magnetic windings with safety and accuracy.
Lovato DMG series digital multimeters and power analysers
22 June, 2011 byThe Lovato DMG series of digital multimeters and power analysers can provide measurement of up to more than 590 electrical quantities, including harmonics.
Assessing the true cost of test equipment
31 May, 2011 by Masten Evans, Managing Director, LivingstonIn these austere times, management is being forced more than ever before to keep expenditure under control. Cuts have been made to company staffing levels, marketing budgets and in a number of other areas. If these technology enterprises are to survive though, they cannot afford to compromise on product/service quality, which means that choosing the right test equipment is more important than ever.
Megger DLRO 600 digital microhmmeter
24 May, 2011Available to rent, the Megger DLRO 600 digital microhmmeter measures resistance between 0.1 µΩ and 1 Ω at high currents and provides test currents from 10 to 600 A subject to the load resistance and supply voltage.
AFL Telecommunications Noyes M200 OTDR
16 May, 2011AFL Telecommunications’ Noyes M200 is a lightweight optical time-domain reflectometer (OTDR) used for testing multimode (850/1310 nm) and singlemode (1310/1550 nm) wavelengths. The M200 is suitable for Tier 2 testing of premises (building and campus) networks or certification and troubleshooting of FTTX PON networks. The bright and transflective display makes it suitable for both indoor and outdoor applications.
HV Diagnostics Hipot insulation tester 30 kVDC and VLF
29 April, 2011 byAvailable to rent, the HV Diagnostics Hipot insulation tester 30 kVDC and VLF is used for testing of solid dielectric cables such as XLPE and EPR and performs automatic and integrated load capacitance measurement with optimum frequency selection.
Omicron CMC256-6 EP Advanced Protection Relay Test System
29 April, 2011 byAvailable to rent, the Omicron CMC256-6 EP Advanced Protection Relay Test System verifies the working condition of secondary protection relay systems.
Megger TDR 2000 cable fault locator
27 April, 2011Available to rent, the Megger TDR 2000 cable fault locator can be used to identify and locate a wide range of faults on metallic cables.
Megger MOM2 handheld microhmmeter
14 April, 2011 byThe MOM2 handheld microhmmeter can be used to measure the resistance of circuit breaker contacts, bus bars, connections and other links conducting high currents.
Yokogawa CA450 process multimeter/calibration instrument
08 March, 2011 byThe Yokogawa CA450 process multimeter is an on-site measuring instrument that provides the functionality of a digital multimeter for basic measurements such as voltage, current and resistance, and also acts as a calibrator for electrical and process measurements.
Fluke 2AC VoltAlert AC non-contact tester
07 March, 2011 byThe 2AC VoltAlert AC non-contact tester detects voltage and is claimed to provide safer, faster working conditions. The tester detects energised circuits and defective grounds, making it suitable as a first-line go/no-go tester for an electrician.
Fluke 5522A multiproduct calibrator
07 March, 2011 byThe 5522A multiproduct calibrator is durable enough to be safely transported for on-site or mobile calibration of a wide variety of electronic test tools and is suitable for engineers, technicians and lab managers.
