Stratix series industrial ethernet switches
03 February, 2009 | Supplied by: Rockwell Automation Australia
The Rockwell Automation/Cisco co-branded Stratix series is a range of industrial ethernet switches.
AV automation solutions
02 February, 2009 | Supplied by: Midwich Australia
The Calypso Control ezRoom range of integrated automation solutions is designed to make room automation simple and cost effective for classrooms, boardrooms and meeting rooms.
Fan coil controller
02 February, 2009 | Supplied by: Philips Dynalite
The DDFCUC fan coil unit controller provides air-temperature management in commercial environments, such as hotels and offices, while seamlessly integrating with complementary control systems.
C65xx series industrial PCs
01 February, 2009 | Supplied by: Beckhoff Automation Pty Ltd
The C65xx series of industrial PCs (IPC) is designed to be installed in control cabinets or in the rear panel of a control or console housing. By integrating the IPC into an existing housing, this compact solution enables flexible push-button configurations and extension options at the front of the console housing.
Automation controller
01 February, 2009 | Supplied by: Rockwell Automation Australia
The CompactLogix L23 Allen-Bradley controller is an addition to the CompactLogix family, extending the functionality and flexibility of the Logix control platform to small machine-level control applications.
LSW16G and LSW24G gigabit ethernet switches
29 January, 2009 | Supplied by: CABAC
The rackmount LSW16G and LSW24G unmanaged gigabit ethernet switches are equipped with 16 x 10/100/1000 Mbps and 24 x 10/100/1000 Mbps ports respectively. The switches provide a backbone link to switched workgroup or a server ‘fat-pipe’ link.
DIN rail-mountable energy controller
01 January, 2009 | Supplied by: Philips Dynalite
The DDMC802GL is a multipurpose controller designed for home automation and hotel suite control applications.
Lighting/building automation gateway
01 January, 2009 | Supplied by: Philips Dynalite
The 100BT ethernet gateway series of 10/100 Base-T ethernet interfaces permits ethernet connectivity between Dynalite’s DyNet peer-to-peer communications serial bus network and third-party technologies, such as audiovisual and building automation systems.
Non-cogging AC servomotor
01 December, 2008 | Supplied by: M Rutty & Co Pty Ltd
The non-cogging MLL series of AC servomotors has no teeth in the stators, so there is no reluctance variation in the 360° motor rotation.
Compact operator panel
01 December, 2008 | Supplied by: Siemens Ltd
The Simatic HMI TP 177B is a widescreen-format operator panel that expands the 170 family of panels, notable for their compact format and a visualisation screen.
Motor starter module
01 December, 2008 | Supplied by: Turck Australia Pty Ltd
The BL20 motor starter economy module enables daisy-chain connection from a single I/O module to up to 48 motor starters via a ribbon cable on a single fieldbus node.
Hazardous area motor starters
01 December, 2008 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Stahl DOL electrical motor starters are a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.
High-efficiency motors
01 December, 2008 | Supplied by: ABB Australia Pty Ltd
A range of low-voltage AC motors has been launched with improved energy efficiency and life cycle values over the ABB models they replace.
Industrial HMI
01 December, 2008 | Supplied by: Rockwell Automation Australia
The Allen-Bradley PanelView Component operator interface is a human machine interface (HMI) designed for industrial applications.
Timing module
01 December, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs.