Automation, security and control

New intruder alarm and CCTV standards

23 July, 2008

SAI Global has released the latest intruder alarm and CCTV Australian Standards — AS/NZS 2201.5:2008 'Intruder alarm systems — Alarm transmission systems’ and AS 4806.4 — 2008 ‘Closed circuit television (CCTV) — Remote video’.


In-monitor display LCD panels

01 July, 2008 | Supplied by: Midwich Australia

The Marshall Electronics IMD LCD panels with in-monitor display functionality are designed for video-production houses, broadcasters and mobile units, providing an ‘all-in-one’ solution that allows information to be displayed on screen.


Wireless power control

01 July, 2008 | Supplied by: Micromax Pty Ltd

The Banner Engineering FlexPower wireless nodes are designed to enable Banner SureCross monitoring and control systems to operate using 10-30 VDC line power, solar panels or battery modules in remote or difficult-to-access locations.


‘Invisible’ speakers

01 July, 2008 | Supplied by: QualiFi Pty Ltd

The Stealth Acoustics X series of ‘invisible’ flat-front speakers is designed for in-wall or ceiling installation for home theatre and distributed audio systems, where the speakers are indistinguishable from the wall surface.


3D projector

01 July, 2008 | Supplied by: Amber Technology Limited

The F10 AS3D single-chip DLP SXGA+ projector from projectiondesign is a portable high-resolution active 3D stereoscopic projector, designed for the demanding visualisation and simulation environments such as research centres and universities.


Home climate control

01 July, 2008 | Supplied by: Clipsal - by Schneider Electric

The C-Bus air-conditioning thermostats are simple to use and are designed to complement Clipsal Saturn wall switches.


Motor and gearbox combination

01 July, 2008 | Supplied by: M Rutty & Co Pty Ltd

The Portescap ironless Mu 915L-61 series motor and gearbox combination is claimed to offer the power, performance and reliability that is required in medical applications.


Home climate controller

01 July, 2008 | Supplied by: Legrand Australia P/L

The Bticino Light Tech NT4442 room thermostat controller can be interconnected with both heating and air conditioning systems for convenient climate control within a home.


Wall plate with thermostat

01 July, 2008 | Supplied by: i-Lifestyle

The expanded Berker TS Sensor can be used to control additional room-based KNX/EIB control functions such as heating, air conditioning or ventilation. This version features an integrated temperature sensor and built-in bus coupling unit, so no additional push-button interfaces are required.


Video intercom

01 July, 2008 | Supplied by: i-Lifestyle

The Siedle Vario in-home video intercom system bus can now perform functions previously only available using high-end intercom installation system.


BG42 and BG45 brushless DC motors

01 July, 2008 | Supplied by: M Rutty & Co Pty Ltd

The Dunkermotoren range of brushless DC motors has been expanded with the release of the BG42 and BG45 models, designed for use in industrial automation and medical applications.


Failsafe manual reset thermostats

01 July, 2008 | Supplied by: Practical Control Solutions

The KMF series of failsafe thermostats monitor temperatures in furnaces, ovens, kilns, boilers or any application where an over-temperature condition would result in a critical failure.


CMP-series servomotors

01 June, 2008 | Supplied by: SEW-Eurodrive Pty Ltd

The CMP-series servomotors are lower-torque motors that complement the CM-series servo in a compact form-factor.


Home theatre controller

01 June, 2008 | Supplied by: Convergent Technologies Pty Ltd

The Control4 HC-500 is a high-performance IP-based media server that is optimised for whole home automation systems with large home theatres requiring extensive I/O connections for device control.


Allen-Bradley CompactLogix Motion controller

01 June, 2008 | Supplied by: Rockwell Automation Australia

The Allen-Bradley CompactLogix L45 controller delivers scalable and integrated motion control. Controlling up to eight axes of motion, the device is suitable for end users with small- to mid-range applications, or machine builders looking to standardise on a single integrated motion control platform.


  • All content Copyright © 2021 Westwick-Farrow Pty Ltd