The E250 range of latching relays (also known as stepping relays) offer convenient changeover of contact position after an impulse signal from a push-button or similar.
The range utilises a standard DIN-rail mounting format. The position of the contacts will switch in response to each pulse sent to the coil via normally open push-buttons or as part of a control circuit. The design of the mechanism allows the coil to withstand a ‘button stuck’ condition without damaging the coil.
The relays also provide a manual control lever that allows simple indication of the contact position.
Contact configurations of 1 NO, 1 NO + 1 NC, 2 NO, 1 CO and 2 CO are available, with ratings of 16 and 32 A. A variety of coil voltages in both AC and DC is available to cover most control circuit applications. The coils have a dual AC/DC voltage rating with a DC/AC ratio of 0.5:1.
The relays are often used in applications such as the control of lighting circuits, duty cycling of pumps and any application where a simple method of sequencing is required.
Phone: 1800 602 020
STMicroelectronics VIPerGaN 100 W converters for energy-efficient appliances
The high-voltage converters are designed to extend wide-bandgap energy savings throughout...
ReluxDesktop 2026.2 professional lighting design software
This version includes key Australian and New Zealand standards for interior, emergency, road and...
EXAIR Dual Hazardous Location Cabinet Cooler Systems
EXAIR's Dual Hazardous Location Cabinet Cooler Systems provide a maintenance-free solution...
