Die-cast aluminium enclosures
15 October, 2009 byThe 1550 range of industry-standard sized, small die-cast aluminium enclosures provides robust mechanical protection and good EMC attenuation levels, making them suitable for use in a wide variety of applications. The initial range comprises six sizes, with the full range expanding 16 sizes over time.
Flange mounting enclosures
09 July, 2009 byA full flange accessory option is available for the DiamondShield series of nonmetallic enclosures, providing improved mounting versatility in positioning enclosures to fit onto poles, struts or walls in both indoor and outdoor applications including harsh corrosive and industrial environments.
Docking station connector
09 July, 2009 byThe Han-Modular docking frame enables a docking connector in the IP20 range to be set up without a housing, for use in insertion processes, such as racks in switch cabinets, that are not hand guided.
Watertight enclosures
09 July, 2009 byThe 1457 extruded aluminium family of small enclosures has been expanded with the introduction of RFI-screened IP54 environmentally sealed versions. The 1457 E series is designed to house PCBs and small electronic, electrical or pneumatic components.
Outdoor heat exchanger
08 July, 2009 byThe Hoffman Climagard outdoor heat exchanger provides closed-loop cooling that removes up to 3000 W of enclosure heat to provide an efficient means of cabinet cooling and protect against the detrimental effects of overheating. It is designed for use in a range of telecommunications, outside plant and industrial applications.
Housing range made of high-grade stainless steel
25 March, 2009Han-INOX, a housing range made of high-grade stainless steel, is created for applications in areas such as the food and beverage, processing technology and in the toughest external environments.
Rack-mountable hot air exhaust system
03 February, 2009The Cool-Stack III, manufactured by Active Thermal Management, is a rack-mountable one-unit high hot air exhaust system that utilises four 120 mm fans that are claimed to pull up to 70 cfm of hot air out from tightly packed racks, while generating low noise levels of 26 dB. Heated air is exhausted through the perforated front panel, or exhaust fittings and tubing provided with the unit, to move hot air away from a cabinet.
Vented indoor enclosure
01 February, 2009The Hoffman T1FLO Type 1 vented indoor enclosure features an internal thermal management solution that provides a built-in active cooling/ventilation system with a factory-installed fan (115 VAC), vent, filter and thermostat to keep heat-sensitive drives and controls cool and protected.
Sloped roof stainless steel enclosures
01 December, 2008The Zanardo D93/SR sloped roof stainless steel enclosures are manufactured from 1.5 mm 316-grade stainless steel and characterised by their integrated 38° sloping roof, making them suitable for installation in both harsh mining conditions and the clean hygienic environments of the food industry.
Equipment enclosure
01 December, 2008The Sarel Spacial 6000 enclosure family has been extended to include a floor-standing range, designed to house control and automation and low-voltage electrical distribution equipment in commercial and industrial applications.
Rail mounting enclosures
01 October, 2008Erntec offers enclosures for M3 DIN rail mounting enclosures ranging from 1-9 modules.
IP55-rated enclosures
01 September, 2008The IP55 range of enclosures and junction boxes has been developed with materials to ensure structural and environmental stability in harsh environments. The enclosures are available in 10 sizes, with internal dimensions from 100 x 100 x 80 mm to 310 x 240 x 160 mm.
Powered air vents
01 September, 2008The Cool-Vent range of powered air vents, manufactured by Active Thermal Management, is designed for mounting into office or building cabinetry, to match specific wood finishes and complement interior decors.
Equipment cooling system
01 September, 2008The Dual-Mode Component Cooler, manufactured by Active Thermal Management, is designed to operate in either of two modes to quietly cool installed electronic components with insufficient ventilation. The unit is intended for use on shelving, in open bookcases and other semi-enclosed locations.
Industrial enclosure
01 August, 2008The MicroTCA Cube enclosure is a direct solution for an industrial environment-based MicroTCA.OR1.0 application.
