Soanar IAP-120/120+ industrial wireless access point
05 February, 2010 byThe IAP-120/120+ industrial wireless access point from ORing Industrial Networking is an IEEE802.11b/g WLAN access point (WAP) with two LAN ports that can be configured to operate in AP, bridge, repeater or AP Client modes.
Industrial wireless bridge
29 October, 2009 byThe AWK-5222 is a rugged, IEEE 802.11 a/b/g-compliant, 3-in-1 industrial wireless AP/bridge/client that is claimed to be immune to disconnections caused by radio interference, making it suitable for deployment in critical industrial wireless applications.
Optically isolated wireless relay
16 October, 2009The WWP-IIRO-8 data acquisition wireless relay modules feature a pair of intelligent 16-channel digital I/O units that communicate directly with each other via a 2.4 GHz wireless connection of up to 5 km line-of-sight. Each unit contains eight electromechanical relays and eight optically isolated digital inputs.
Wireless connection for ProfiNet
09 July, 2009The IM154-6 PN HF IWLAN module is a ProfiNet-ready wireless interface module that enables the IP65/67 rated ET200pro distributed I/O system to communicate via industrial wireless LAN.
NICTA wins international innovation award
06 July, 2009NICTA's innovative development in gigabit wireless communications has been recognised in an international technology award.
Intrinsically safe transceiver
03 February, 2009The Banner Engineering DX99 wireless transceiver node is designed for installation in hazardous areas and combines three technologies in a single housing: battery-based power supply, wireless technology for mission critical data and intrinsically safe operation.
On-site wireless testing
01 October, 2008The Banner Engineering SureCross DX70 wireless developer’s kit consists of a gateway and node transceiver to enable on-site wireless testing. The self-contained kit provides battery boxes with test buttons and indicator lights simulating inputs and outputs to determine an application’s specific range and response time requirements.
Belden to acquire Trapeze Networks
16 July, 2008Belden recently announced plans to acquire Trapeze Networks, a provider of wireless local area networking (WLAN) equipment, for US$133 million in cash. The acquisition is intended to build on Belden's position as a complete signal transmission solutions provider.
Wireless LAN switch
01 July, 2008BWS-8012 is a 12-port wireless LAN switch that has been added to the existing 8- and 24-port switches in the Belden Wireless Solution range, using the Layer-2 Edge Architecture/Channel Blanket system to provide a predictable rate of wireless connectivity and quality of service.
Wi-Fi enclosures
01 July, 2008The BWIE-100 (indoor) and BWOE-100 (outdoor) Wi-Fi enclosures are designed to provide secure accommodation for the remote placement of the Belden XtraThin wireless access points (APs).
Four-radio wireless access point
01 June, 2008The XtraThin BWAP-400 wireless access point (AP) is available in a four-radio version for use in interference-free wireless LAN systems with predictable RF performance.
Free space optics data transceivers
01 April, 2008The Canon USA Canobeam DT-100 series of free space optics data transceivers are designed to be deployed as a wireless part of any communications infrastructure solution for low-cost, high-security and high-speed networking.
Wireless sensing solution
01 April, 2008The Banner Engineering DX70 SureCross is a wireless sensing solution for secure communications in remote or hard-to-reach locations in industrial applications, such as remote I/O data acquisition and energy monitoring.
World-class ICT laboratory opens in Canberra
25 December, 2007ACT Chief Minister Jon Stanhope has officially opened the $60 million National Information Communication Technology Australia (NICTA) Laboratory Facility in Canberra.
