Industrial electrical and automation testers
03 February, 2009 | Fluke Australia Pty Ltd
The ScopeMeter 225C and 215C test tools perform verification of electrical signal quality on industrial buses like Fieldbus, CANbus, Profibus and Modbus.
Stratix series industrial ethernet switches
03 February, 2009 | Rockwell Automation Australia
The Rockwell Automation/Cisco co-branded Stratix series is a range of industrial ethernet switches.
Industrial category 6 UTP cables
03 February, 2009 | Belden Australia Pty Ltd
The DataTuff 7940A category 6 unshielded twisted pair cable is designed for industrial ethernet applications such as mission-critical network and automation system backbones being installed in discrete industrial manufacturing, processing plants and large industrial infrastructures such as water treatment and utility plants, airports, transportation terminals and shipyards.
Tradies’ Bluetooth headset
03 February, 2009 | Plantronics Pty Ltd
The Explorer 370 is a ruggedised Bluetooth headset designed to withstand harsh conditions so outdoor workers and tradespeople can answer calls and continue working.
High-immunity RCDs
03 February, 2009 | ABB Australia Pty Ltd
The AP-R range of residual current devices (RCDs) is designed with high-immunity characteristics to overcome the problems associated with unwanted tripping due to overvoltages of atmospheric or operational origin in domestic, commercial and industrial systems where service continuity is essential.
Active power filter
02 February, 2009 | Westek Electronics Pty Ltd
The SPC smart power conditioner from PQ Tech is an active harmonic filter series suitable for single-phase sub-distribution circuits in commercial buildings, shopping and entertainment centres and small industrial enterprises.
AV automation solutions
02 February, 2009 | Midwich Australia
The Calypso Control ezRoom range of integrated automation solutions is designed to make room automation simple and cost effective for classrooms, boardrooms and meeting rooms.
LED downlight
02 February, 2009 | Signify
The eW Downlight SM Powercore is a low-profile, surface-mounted downlight for general lighting applications. Offering the usual LED benefits of high energy efficiency and long lifetime, it provides significant energy and maintenance savings in comparison to incandescent and halogen-based luminaires.
Dimmable energy saver lamp
02 February, 2009 | Signify
The dimmable Tornado T3 energy saver lamp provides energy-efficient lighting in a compact size, enabling it to be used as a direct replacement for incandescent bulbs and standard energy savers in indoor fixtures, with energy savings of 80% claimed over incandescent bulbs.
Fan coil controller
02 February, 2009 | Philips Dynalite
The DDFCUC fan coil unit controller provides air-temperature management in commercial environments, such as hotels and offices, while seamlessly integrating with complementary control systems.
Digital multimeters
02 February, 2009 | Eaton Electrical (Australia) Pty Ltd
The Kyoritsu digital multimeter range comprises four models: 1051, 1052, 1061 and 1062 and features colour-coded range selection switches and function buttons for ease of use.
Impedance stabilisation for category 6 cabling
02 February, 2009 | Westek Electronics Pty Ltd
The ISN T8-Cat 6 impedance stabilisation network (ISN) from Teseise (formerly Schaffner Test Systems) is designed for measurements on up to four unshielded single balanced pairs of category 6 cables.
Energy-efficient UPS
02 February, 2009 | Eaton Electrical (Australia) Pty Ltd
The Powerware 9130 series of UPS is designed to help users carry out green initiatives in IT environments. The 700-3000 VA UPS models are available in rack and tower formats and feature a high-efficiency design that is claimed to save energy without sacrificing reliability.
T5 fluorescent lamp retrofit kit
02 February, 2009 | WF Energy Controls
The Save it Easy electronic ballast enables energy-efficient T5 fluorescent tube lamps to be retrofitted to existing but inefficient T8 fluorescent lamp fittings.
DC to AC inverter
02 February, 2009 | Eaton Electrical (Australia) Pty Ltd
The Matrix modular DC to AC inverter is an integrated inverter power system designed for applications where high reliability backup AC supply is required.
