Archicentre warns of hot weather stress on electrical wiring
16 February, 2009Recent hot weather is placing condiserable load on electrical wiring in homes, but exposing some residents to the risk of fires due to sub-standard or inadequate installations.
Crimp lugs for flexible cables
03 February, 2009Dual System by Elpress AB is designed for crimping copper lugs onto flexible or welding cables. The copper lug is first crimped with a conventional hexagonal crimp, then, while the hex dies are still closed, a sequential indent crimp is performed.
Quick-connect wiring system
03 February, 2009The M16 powerfast wiring system comprises cordsets and 2-, 3- and 4-pin connectors and tees in compact form factors for machine power distribution and motor control, providing a time- and cost-saving replacement for traditional hard-wiring installations.
Minifast 19-pin industrial connector
01 February, 2009The minifast connector line has been expanded with the addition of a 19-pin connector to address more applications.
Broadcast connectors
01 October, 2008Fischer Connectors has improved the design of its 1051 Triax Connector.
Cordsets with shielding option
01 October, 2008The 6- and 8-pin M23 powerfast connectors are now available as moulded cordsets, which may also be completely shielded by connecting a braided shield directly to the connector’s coupling nuts.
ConPower circular connector range
01 October, 2008The ConPower circular connectors range consists of two lines: the P30 has the M23 threaded locking systems, while the P70 has the M40 system.
RFI shielded desktop enclosure
01 October, 2008The InterMeZo 19" desktop enclosure is based on a flexible frame work construction composed of profiles and angle connectors, allowing the quick assembly of individual sizes.
WS60 cable actuated position sensor
01 October, 2008The cable actuated position sensor WS60 operates in 15, 30 and 60 m measurement ranges. Designed for use with elevators, the durable sensor provides an accuracy of up to 0.025%.
Allen-Bradley IEC terminal block range
01 September, 2008The Allen-Bradley IEC terminal block range has been extended to provide increased functionality and installation flexibility, while saving panel space and set uptime.
Power and I/O interconnects
01 September, 2008Samtec has added rugged interface products, including PowerStrip/55 high-power interconnects and AccliMate and LifeJack I/O interfaces, to its product line.
Junction bricks
01 August, 2008The JRBS junction bricks for Foundation Fieldbus applications provide quick connection of multiple devices to the main fieldbus trunk in remote I/O applications such as oil and gas, petrochemical, power generation and distribution, pharmaceutical and water processing and management industries.
Lightweight connectors
01 August, 2008Fischer Connectors has released the AluLite range of lightweight aluminium circular push pull connectors, which are significantly lighter than typical metal connectors.
Festoon cables
01 July, 2008The Rheyflat-N screened and unscreened rubber flat festoon cables are designed to be used in handling systems, lifts and e-chain cable carrier systems in power, control and bus applications with high mechanical stress and frequent bending in one plane only. The copper-screened versions of the cable are used in environments where protection is needed against electro-magnetic disturbances caused by power cables.
Flexible power cable
01 July, 2008The Titanex H07RN-F single- and multi-core flexible cables are intended for installations with moving equipment, electric appliances and for building sites.
