Electrical distribution > Cables and connectors

Cable bushings and grommets

09 July, 2009 by

The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.


Field termination M12 connector

09 July, 2009 by

The Field termination M12 connector enables the installer to choose between two different kinds of termination methods, making it adaptable to suit differing field situations and conditions. A wide range of shielded cables can be terminated onto the connector.


Shielded M8 cord sets

09 July, 2009 by

The M8 picofast cord sets are now optionally available as a completely shielded unit by connecting a braided shield directly to the coupling nut. This provides a reliable connection with 100% cable and connector shielding, which protects against electromagnetic and radiofrequency interference.


Chemical resistant connectors

09 July, 2009

The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.


New material could help cut future energy losses

27 April, 2009

A new material developed in UK universities could be deployed in the future to conduct electricity more efficiently.


Inline connectors

25 March, 2009

Aqua Safe is a range of inline connectors made from polycarbonate and glass-filled nylon, to suit a wide range of cable sizes, together with screwed and flanged bulkhead housings, and sealing caps.


Archicentre warns of hot weather stress on electrical wiring

16 February, 2009

Recent hot weather is placing condiserable load on electrical wiring in homes, but exposing some residents to the risk of fires due to sub-standard or inadequate installations.


Crimp lugs for flexible cables

03 February, 2009

Dual System by Elpress AB is designed for crimping copper lugs onto flexible or welding cables. The copper lug is first crimped with a conventional hexagonal crimp, then, while the hex dies are still closed, a sequential indent crimp is performed.


Quick-connect wiring system

03 February, 2009

The M16 powerfast wiring system comprises cordsets and 2-, 3- and 4-pin connectors and tees in compact form factors for machine power distribution and motor control, providing a time- and cost-saving replacement for traditional hard-wiring installations.


Minifast 19-pin industrial connector

01 February, 2009

The minifast connector line has been expanded with the addition of a 19-pin connector to address more applications.


RFI shielded desktop enclosure

01 October, 2008

The InterMeZo 19" desktop enclosure is based on a flexible frame work construction composed of profiles and angle connectors, allowing the quick assembly of individual sizes.


Cordsets with shielding option

01 October, 2008

The 6- and 8-pin M23 powerfast connectors are now available as moulded cordsets, which may also be completely shielded by connecting a braided shield directly to the connector’s coupling nuts.


Broadcast connectors

01 October, 2008

Fischer Connectors has improved the design of its 1051 Triax Connector.


ConPower circular connector range

01 October, 2008

The ConPower circular connectors range consists of two lines: the P30 has the M23 threaded locking systems, while the P70 has the M40 system.


WS60 cable actuated position sensor

01 October, 2008

The cable actuated position sensor WS60 operates in 15, 30 and 60 m measurement ranges. Designed for use with elevators, the durable sensor provides an accuracy of up to 0.025%.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd