Lighting dimmer
01 July, 2008 | Philips Dynalite
DDLE802 is an 8-channel leading-edge lighting dimmer with a maximum load per channel of 2 A, suitable for use with incandescent, low-voltage, neon and selected fluorescent fixtures in residential and hotel room applications, where small loads are typical.
PS: Thermal imagers
01 July, 2008 | Fluke Australia Pty Ltd
The TiR1 and TiR thermal imagers are designed for use in building restoration and inspection applications.
3D projector
01 July, 2008 | Amber Technology Limited
The F10 AS3D single-chip DLP SXGA+ projector from projectiondesign is a portable high-resolution active 3D stereoscopic projector, designed for the demanding visualisation and simulation environments such as research centres and universities.
Failsafe manual reset thermostats
01 July, 2008 | Practical Control Solutions
The KMF series of failsafe thermostats monitor temperatures in furnaces, ovens, kilns, boilers or any application where an over-temperature condition would result in a critical failure.
RCBO circuit breaker
01 July, 2008 | NAW Controls
The MRR series combination MCB and RCD (RCBO), developed by motor control gear manufacturer Mack Electrical, fits all the necessary electronics of an earth leakage trip unit and an over-current tripping mechanism into a single-pole MCB case with a 6 kA fault current rating.
Cable catalogue and handbook
01 July, 2008 | Nexans Olex Australia Pty Ltd
The 2008 editions of the Olex Handbook and Olex Industrial catalogues have been released, introducing a number of new products.
Harmonic filters
01 July, 2008 | Westek Electronics Pty Ltd
The ECOsine FN3410/3412 series of three-phase harmonics filters is the latest generation of Schaffner broadband passive harmonics filters to enable better utilisation of the power capacity of distribution transformers and networks, thereby increasing efficiency to either allow more nonlinear load to be connected to the same system or postpone expensive upgrades to the electrical system capacity.
Auxiliary contacts for MCBs
01 July, 2008 | ABB Australia Pty Ltd
Designed to mount on the bottom of the S200 range of ABB miniature circuit breakers (MCBs), the AC14 and DC13 auxiliary contacts are available as either a ‘1 NO’ or ‘1 NC’ contact configuration. Despite their small size, the switching contacts are full voltage rated at 2 A (AC14) at 230 VAC and 1 A (DC13) at 50 VDC.
Fluke 1625 GEO earth ground tester
01 July, 2008 | RS
The Fluke 1625 GEO earth ground tester enables ‘stakeless’ testing to be carried out for earth ground loop resistance testing, negating the need for a separate earth ground clamp.
EX 800 series clamp multimeter
01 July, 2008 | Extech Instruments
The EX 800 series clamp multimeter combines a 1000 A clamp meter with a non-contact infrared thermometer guided by a laser pointer.
Broadband power amp
01 July, 2008 | ASD Technology Pty Ltd
ASD has released the AMF-6B-06001800-70-40P-PS self-cooled 3RU rackmount broadband high power amplifier, covering 6-18 GHz and delivering about 10 W.
Termination tool
01 July, 2008 | Fluke Networks
The JackRapid termination tool has been redesigned with a new ergonomic handle and support for additional jack types.
Power management for UPS
01 July, 2008 | Opengear
The Network UPS Tools power management software has been included in the Opengear range of console servers, adding to its overall power management offering for data centres and remote branch offices.
Data equipment cabinets
01 July, 2008 | Cable Ways Ltd
OfficePac is a series of panel support cabinets used for housing equipment and patching facilities in data installations.
Wireless power control
01 July, 2008 | Micromax Pty Ltd
The Banner Engineering FlexPower wireless nodes are designed to enable Banner SureCross monitoring and control systems to operate using 10-30 VDC line power, solar panels or battery modules in remote or difficult-to-access locations.
