Harmonic filters
01 July, 2008 | Westek Electronics Pty Ltd
The ECOsine FN3410/3412 series of three-phase harmonics filters is the latest generation of Schaffner broadband passive harmonics filters to enable better utilisation of the power capacity of distribution transformers and networks, thereby increasing efficiency to either allow more nonlinear load to be connected to the same system or postpone expensive upgrades to the electrical system capacity.
Auxiliary contacts for MCBs
01 July, 2008 | ABB Australia Pty Ltd
Designed to mount on the bottom of the S200 range of ABB miniature circuit breakers (MCBs), the AC14 and DC13 auxiliary contacts are available as either a ‘1 NO’ or ‘1 NC’ contact configuration. Despite their small size, the switching contacts are full voltage rated at 2 A (AC14) at 230 VAC and 1 A (DC13) at 50 VDC.
Fluke 1625 GEO earth ground tester
01 July, 2008 | RS
The Fluke 1625 GEO earth ground tester enables ‘stakeless’ testing to be carried out for earth ground loop resistance testing, negating the need for a separate earth ground clamp.
EX 800 series clamp multimeter
01 July, 2008 | Extech Instruments
The EX 800 series clamp multimeter combines a 1000 A clamp meter with a non-contact infrared thermometer guided by a laser pointer.
Broadband power amp
01 July, 2008 | ASD Technology Pty Ltd
ASD has released the AMF-6B-06001800-70-40P-PS self-cooled 3RU rackmount broadband high power amplifier, covering 6-18 GHz and delivering about 10 W.
Termination tool
01 July, 2008 | Fluke Networks
The JackRapid termination tool has been redesigned with a new ergonomic handle and support for additional jack types.
Power management for UPS
01 July, 2008 | Opengear
The Network UPS Tools power management software has been included in the Opengear range of console servers, adding to its overall power management offering for data centres and remote branch offices.
Data equipment cabinets
01 July, 2008 | Cable Ways Ltd
OfficePac is a series of panel support cabinets used for housing equipment and patching facilities in data installations.
Wireless power control
01 July, 2008 | Micromax Pty Ltd
The Banner Engineering FlexPower wireless nodes are designed to enable Banner SureCross monitoring and control systems to operate using 10-30 VDC line power, solar panels or battery modules in remote or difficult-to-access locations.
Dimmerable reflector lamps
01 July, 2008 | Megaman Lighting Australia Pty Ltd
The BR1411d is an 11 W GU10 reflector lamp that can be manually dimmed between 10 and 100% of light output without the need for special equipment or control wiring.
Relay controller
01 July, 2008 | Philips Dynalite
DDRC1220FR-GL is a relay controller designed to control any type of switched load. The power circuit is a ‘feed through’ design and is electrically equivalent to a 12-pole contactor, with the additional advantage of each pole being separately controllable via the DyNet network.
DIN rail cutter
01 July, 2008 | Amplex Industries
The DRC-750 DIN rail cutter is designed to cut standard 35 x 7.5 mm steel DIN rails.
UPS battery management
01 July, 2008 | Rittal Pty Ltd
The RiBat battery management system is designed to extend the life of UPS batteries used in IT infrastructure, with a claimed service life improvement of up to 30%.
Wall plate with thermostat
01 July, 2008 | i-Lifestyle
The expanded Berker TS Sensor can be used to control additional room-based KNX/EIB control functions such as heating, air conditioning or ventilation. This version features an integrated temperature sensor and built-in bus coupling unit, so no additional push-button interfaces are required.
Flexible power cable
01 July, 2008 | Nexans Olex Australia Pty Ltd
The Titanex H07RN-F single- and multi-core flexible cables are intended for installations with moving equipment, electric appliances and for building sites.
