Stahlin J Series industrial enclosures
05 February, 2010 | Stahlin Non-Metallic Enclosures
The J Series industrial enclosures are designed for harsh, aggressive environments. Originally developed as an electrical junction box for the oil refining and petrochemical industries, the series has developed into a versatile industrial enclosure with varied applications for use from high-end electronics to extreme, corrosive indoor and outdoor applications.
Jaycar Electronics WattsClever Power Monitor
05 February, 2010 | Jaycar Electronics Pty Ltd
The WattsClever Power Monitor (model MS6155) enables households and businesses to monitor their electricity usage in detail.
HPM Extra Safe power points with rotating safety covers
05 February, 2010 | Legrand Australia P/L
Rotating, spring-loaded safety covers feature on HPM Extra Safe power points and remain firmly closed when not in use.
Soanar IAP-120/120+ industrial wireless access point
05 February, 2010 | Soanar Limited
The IAP-120/120+ industrial wireless access point from ORing Industrial Networking is an IEEE802.11b/g WLAN access point (WAP) with two LAN ports that can be configured to operate in AP, bridge, repeater or AP Client modes.
Jaycar Electronics Mains Standby Power Saver
05 February, 2010 | Jaycar Electronics Pty Ltd
The Mains Standby Power Saver (model MS6146) is a power switch that monitors electrical appliances connected to it and, once it detects that they are in standby mode, will switch them off completely after a short delay.
AMP NETCONNECT Sigma-Link copper cabling system
04 February, 2010 | Commscope
The AMP NETCONNECT Sigma-Link is a pre-terminated and easy to install copper cabling system.
FLIR BuildIR infrared building analysis software
03 February, 2010 | Teledyne FLIR
FLIR BuildIR is a software package specifically designed to carry out advanced analysis of building structures, by analysing images taken with an infrared camera and creating inspection reports based on these images.
FLIR i7 building diagnostics infrared camera
01 February, 2010 | Teledyne FLIR
FLIR has added the i7 camera to its range of entry-level infrared cameras. Suitable for plumbers, electricians, window installers, insulation installers or HVAC technicians, the thermal images create a visualisation of heat differences for the naked eye.
Belden DataTuff industrial ethernet cabling and connectivity solutions
01 February, 2010 | Maser Communications
Belden’s DataTuff industrial ethernet cabling and connectivity solutions, available from Maser, are designed specifically for the industrial environment.
Dialight LedPak Series LED-based fitting
01 February, 2010 | Maser Communications
The LedPak Series fitting from Dialight is an LED-based fixture designed to replace traditional fluorescent lights in and around industrial and commercial areas, environments and applications.
FLIR infrared camera recalibration service
01 February, 2010 | Teledyne FLIR
Owners of FLIR infrared cameras can now have their cameras recalibrated up to 1500°C at the fully accredited service laboratory at FLIR Systems’ head office at Notting Hill in Melbourne.
Dialight LED lighting products
01 February, 2010 | Maser Communications
Dialight LED lighting products have been added to the Maser product range.
Belden Profibus DP cable
01 February, 2010 | Maser Communications
Belden’s cable for Profibus DP, which is designed and manufactured in accordance with the Profibus specifications - Product No. 3079A - is a 150 Ω twinax cable that matches the impedance of the factory automation system, allowing for maximum signal transmission.
Dekoron instrumentation cables
01 February, 2010 | Maser Communications
Dekoron instrumentation cables, available from Maser Communications, are used in plants to transmit information between sensors, analysers and control rooms.
Dekoron Dekabon lead-free cable
01 February, 2010 | Maser Communications
Dekoron’s Dekabon cable is a more environmentally friendly alternative to lead-sheath technology.
