Michell Instruments MIC0010-RH and temperature measurement
10 December, 2012 | Supplied by: AMS Instrumentation & Calibration Pty LtdMaintaining reliable RH measurements in harsh or corrosive environments is notoriously difficult as the conditions themselves degrade the sensors and equipment, often in short time periods. Michell Instruments’ DT722 RH and temperature transmitter provides a solution to this problem.
Narda NIM-511 and NIM-513 electric and magnetic field meters
06 December, 2012 | Supplied by: Narda Safety Test Solutions GmbHThe NIM-511 and NIM-513 industrial field meters from Narda are handheld measuring systems consisting of a basic unit and a measuring probe equipped with electric and magnetic field sensors. They provide a solution for the task of checking the compliance of industrial plant with regulations and limit values for electromagnetic radiation.
Thermal imaging
06 December, 2012 | Supplied by: Teledyne FLIRThe FLIR A310 f and FLIR A310 pt thermal imaging cameras are dual-use systems - temperature monitoring of critical installations and perimeter security. They can be installed almost anywhere to monitor critical equipment and other valuable assets.
AEMC Instrument PEL100 series single- and three-phase power and energy data loggers
03 December, 2012 | Supplied by: AEMC InstrumentsThe PEL 100 series from AEMC Instruments are one-, two- (split-phase) and three-phase (Y, Δ) power and energy data loggers. They are available in two models: the PEL 102 with no display and the PEL 103 with a backlit digital display.
ABB EQ electricity meters
21 November, 2012 | Supplied by: ABB Australia Pty LtdABB has released the EQ family of electricity meters designed for mounting on DIN rail. The EQ meters are designed to be used in main switchboards, distribution boards and consumer units, and can be integrated into an existing system for meter reading. They fit together with other products including MCBs, RCDs and other DIN profile products.
Vicom Aeroflex 3550 touch-screen radio test system
15 November, 2012 | Supplied by: Vicom Australia Pty LtdThis 3550 portable touch-screen radio test system is now available from Vicom.
Fluke CNX wireless testing system
15 November, 2012 | Supplied by: Fluke Australia Pty LtdFluke has introduced the CNX Wireless System, a set of test tools that wirelessly connect multiple measurement modules and send simultaneous readings to a master device up to 20 m away. The rugged, customisable tool set lets users choose various measurement modules based on their specific troubleshooting scenario.
Testo 885 thermal imager with fully radiometric video
05 November, 2012 | Supplied by: Testo Pty LtdThe testo 885 will soon include an option for recording in fully radiometric video. This means heat development over time can be recorded in real time with Testo thermal imagers. Via the USB 2.0 interface, all data from the thermographic recording are directly transferred to the PC and can be stopped and analysed at any point.
Westek Vitrek 4700 high-voltage meter
05 November, 2012 | Supplied by: Westek Electronics Pty LtdThe Vitrek 4700 6-digit precision high-voltage meter is suitable for measurements to 10 kV rms, and by means of the Vitrek HVL range of precision attenuators, can be extended to measure to 35, 70 and 100 kV rms.
Westek Teseq EMC testing CDN network
05 November, 2012 | Supplied by: Westek Electronics Pty LtdThe Teseq coupling/decoupling network (CDN) model HSS-2 is designed for surge testing of balanced unshielded wire pairs. Examples include ethernet 1-, 2- and 4-pair communication buses and coupling is achieved via a 40 Ω resistive impedance in series with capacitive coupling elements.
ABB current measurement system
28 October, 2012 | Supplied by: ABB Australia Pty LtdABB’s ultra-compact system for measuring circuits in distribution systems identifies power-hungry devices and manages loads at the final sub-circuit level.
FLIR GF306 infrared gas detection camera
18 October, 2012 | Supplied by: Teledyne FLIRThe FLIR GF306 infrared camera detects and visualises harmful gases including SF6, an insulating gas used in most types of high-voltage switches around the world.
Molex Premise Networks network management infrastructure
15 October, 2012 | Supplied by: Molex Premise Networks Pty LtdMolex Premise Networks has released the latest version of MIIM, an intelligent infrastructure solution focusing on enhanced network management at the physical layer. MIIM continuously monitors and maps the physical layer, facilitates work order management and enables patch guidance for technicians utilising patch panel LEDs for port indication.
Hioki FT6380 clamp-on earth tester
09 October, 2012 | Supplied by: Power Parameters Pty LtdThe Hioki FT6380 clamp-on earth tester measures grounding wire-earth resistance using dual, super-slim clamp-on technology. The clamp-on system injects accurate testing voltage in ground wires with simultaneous measurement of current and calculation of ground resistance and rejects external magnetic fields, even to 400 A/m field strength.
Fluke Ti105 and TiR105 thermal imagers
08 October, 2012 | Supplied by: Fluke Australia Pty LtdThe Fluke Ti105 and TiR105 thermal imagers both offer Fluke IR-Fusion, which captures a visible light image in addition to the infrared thermal image to take the mystery out of IR image analysis.
