Schneider Electric Micrologic E control unit
16 November, 2011 | Supplied by: Schneider Electric
The Micrologic E control unit features the same protection functions and ‘ammeter’ current measurement capabilities as the Micrologic A control unit, but the new unit adds energy measurement for a low incremental cost. This capability enables energy metering at key points throughout an electrical distribution system, supporting efforts to reduce energy consumption, energy-related costs and greenhouse gas emissions.
Alicat Scientific ATEX-approved mass flow meters and mass flow controllers
15 November, 2011 | Supplied by: Duff & Macintosh
Alicat Scientific’s ATEX-approved mass flow meters and mass flow controllers are approved for hazardous environment (-X) option and are designed to be used in environments where ignitable gases are present.
AIS S30 fixed-mount infrared thermal imagers
09 November, 2011 | Supplied by: Applied Infrared Sensing
The S30 fixed-mount type infrared thermal imagers with compact form factor and aluminium IP67-protected housing are controlled and operated over the ethernet. Still and moving IR images can be acquired and monitored remotely.
Fluke ScopeMeter 190 Series II 2-channel handheld oscilloscopes
04 November, 2011 | Supplied by: Fluke Australia Pty Ltd
The ScopeMeter 190 Series II 2-channel handheld portable oscilloscopes combine the power of a 2-channel oscilloscope with a 5000 count digital multimeter and paperless recording modes. The 2-channel models join the recently introduced 4-channel ScopeMeter 190 Series II models to create the first full line of high-performance portable oscilloscopes with two or four independently isolated input channels, sealed case and Cat III 1000 V/Cat IV 600 V safety rating.
Fluke TL175 TwistGuard test leads
27 October, 2011 | Supplied by: Fluke Australia Pty Ltd
The TL175 TwistGuard test leads feature a manually adjustable tip guard for use in different measurement environments. By simply twisting the test lead, the user can change the exposed probe tip length. When the guard is retracted, the TL175 Test Leads are safety rated for CAT II 1000 V use.
Megger OTS80PB transformer oil tester
19 September, 2011 | Supplied by: TechRentals
The Megger OTS80PB transformer oil tester monitors and maintains oil quality. This measurement indicates the presence or absence of contaminants such as water or conducting particles.
AMS Instrumentation KATflow clamp-on ultrasonic flow meters
15 September, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The KATflow clamp-on ultrasonic flow meters work on the transit-time method. This is based on the principle that sound waves travelling with the flow will move faster than those travelling against it. The resulting difference in transit time is directly proportional to the flow velocity of the liquid and consequently to the volumetric flow rate.
FLIR T-Series infrared cameras
05 September, 2011 | Supplied by: Teledyne FLIR
The T-Series infrared cameras offer 307,200 (640 x 480) infrared pixel resolution. The 640 x 480 advanced models give thermographers the tools they need to work quickly, accurately and efficiently in industrial, utility, heating, ventilation and air conditioning (HVAC) and building diagnostics settings.
AFC Group FiberComplete testing module
31 August, 2011 | Supplied by: AFL Telecommunications Pty Ltd
The PON optimised FiberComplete testing module for the JDSU MTS-4000 mainframe can automatically perform bidirectional insertion loss (IL) and optical return loss (ORL) testing, distance and optical time domain reflectometry (OTDR) with one module, and from one optical port. It is claimed to be the only loss test set on the market that can characterise splices and connectors as well as locate faults.
Fluke Corporation Network Time Machine Version 8
29 August, 2011 | Supplied by: Fluke Networks
Fluke Corporation’s Network Time Machine Version 8 incorporates the company’s proprietary visual fault domain isolation technology that graphically identifies where problems exist while it continues to provide 100% stream-to-disk capabilities with deep packet inspection at rates greater than 10 Gbps for more detailed analysis in a single appliance.
McCrometer precision V-Cone steam-injection flow meter
29 August, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The McCrometer precision V-Cone steam-injection flow meter supports enhanced oil recovery (EOR) technologies that produce heavy oil from demanding environments, such as shallow oil sands deposits and other challenging formations.
Megger DLRO wind turbine lightning protection test lead set
05 August, 2011 | Supplied by: TechRentals
Available to rent, the Megger DLRO wind turbine lightning protection test lead set measures the resistance of a lightning protection circuit between the wind turbine blades and the ground when used with the Megger Digital Low Resistance Ohmmeter.
Yamasaki TP01 power meter
20 July, 2011 | Supplied by: Anderson Corporation Pty Ltd
The Yamasaki TP01 power meter is a multifunctional device that has been specifically designed for the installation, construction and maintenance of fibre-optic networks.
FCI online demo with close-ups of ST100 series flowmeters
20 July, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
An online demo featuring interactive close-ups of the ST100 series flowmeters from Fluid Components International (FCI) makes it easy to learn more about the new benchmark in process and plant gas flow measurement, combining flow sensing performance with feature and function-rich electronics.
Fluke P3 series thermal imagers
19 July, 2011 | Supplied by: Fluke Australia Pty Ltd
The P3 series thermal imagers add four additional products providing high-performance imagers for any budget. All models are specifically designed to work in even the harshest environments and provide good image quality with one-handed, easy-to-use interfaces.
