Electrical distribution

Clipsal 56 series plugs and connectors

12 October, 2012 | Supplied by: Clipsal Australia Pty Ltd

Clipsal’s 56 Series 32, 40 and 50 A size 2 plugs and socket connectors have undergone a design upgrade, to follow the redesign of the 10 to 20 A size 1 plug and socket connectors.


Standby power energy savings

08 October, 2012 | Supplied by: Carbon Reduction Industries Pty Ltd

The Australian designed EcoSwitch eliminates standby power used by appliances and equipment when they are plugged in, but not in use. EcoSwitch plugs in between a power point and power board and is designed so that users can switch off all appliances or equipment easily.


Eaton 9PX UPS

04 October, 2012 | Supplied by: Eaton Electrical (Australia) Pty Ltd

The Eaton 9PX uninterruptible power supply (UPS) is the next generation of energy-efficient 6 to 11 kVA future-proof UPS’s for virtualised environments, where management of rising energy costs and consumption is a consideration.


Clipsal Medium Power Universal Dimmer

04 October, 2012 | Supplied by: Clipsal Australia Pty Ltd

The Medium Power Universal Dimmer from Clipsal is rated at 800 W and designed for universal load compatibility. The unit utilises sophisticated dimming technology to provide full control of a wide range of load types, including small motor loads such as ceilings and exhaust fans.


Weidmuller metal marking system

04 October, 2012 | Supplied by: Weidmuller Pty Ltd

Weidmuller has released a system for creating aluminium and stainless steel markers for use in and around electrical cabinets, as well as to tag cables.


Littelfuse circuit protection product range

19 September, 2012 | Supplied by: element14

element14 Australia offers more than 4000 lines of Littelfuse circuit protection products, suitable for circuit protection in electronics, automotive and industrial applications.


Festo OGGB low-contact gripper

17 September, 2012 | Supplied by: Festo Pty Ltd

The low-contact gripper OGGB from Festo is used for handling highly sensitive solar cells and other fragile items. The gripper transports thin, flexible workpieces with the help of the Bernoulli principle.


CMS Electracom SW18 Series service outlet

10 September, 2012 | Supplied by: CMS Electracom Pty Ltd

The SW18 Series 10 A double pole auto-switched outlet from CMS Electracom integrates soft wiring couplers into the moulding. The connectors, complete with moulded latches, comply to AS/NZ61535.1:2003 and IP4X, so there is no requirement to use safety end caps or tool-only removable connectors.


igus micro flizz MF10 energy chain

06 September, 2012 | Supplied by: Treotham Automation Pty Ltd

The igus micro flizz MF10 energy chain allows even cable diameters up to 16 mm with bending radii up to 75 mm to be routed compactly.


Caterpillar Critical Protection Module UPS system

04 September, 2012 | Supplied by: Caterpillar of Australia Ltd

The Caterpillar CPM is a UPS system that combines a CAT Flywheel UPS, CAT diesel generator and an Automatic Transfer Switch in a sound-attenuated and factory-tested ISO standard container.


Schneider Phaseo ABL4 Regulated switchmode power supplies

03 September, 2012 | Supplied by: Clipsal - by Schneider Electric

The Schneider Electric Phaseo ABL4 range of single- and three-phase power supplies for industrial machines provides reliability of operation with continuous protection against output overload, voltage surges generated on the output through switching inductive loads and against abnormal rises in ambient temperature.


O’Donnell Griffin’s LV installation for Melbourne Water

03 September, 2012 | Supplied by: O'Donnell Griffin

Following 13 months of critical execution to keep complete functionality of Melbourne Water’s Eastern Treatment Plant that processes more than 52% of Melbourne’s waste water, engineering solutions provider O’Donnell Griffin completed the electrical works component of the wet weather upgrade project.


Wieland-Electric gesis IP+ connector system

21 August, 2012 | Supplied by: DKSH Australia Pty Ltd

The gesis IP+ connector system - RST 20i3 and RST20i5 - from Wieland-Electric provides error-free contact up to IP68, even in unfavourable environmental conditions.


NHP Grizz-Bar isolation chassis

17 August, 2012 | Supplied by: NHP Electrical Engineering Products Pty Ltd

The NHP Grizz-Bar isolation chassis has been designed for data centres, hospitals and other applications that require maximum uptime from their power distribution system.


4Cabling cable box

15 August, 2012 | Supplied by: 4Cabling Pty Ltd

The 4Cabling cable box hides cable disorder in small-scale projects requiring 6- to 8-way power boards.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd