Clipsal 31LCDA load correction device
The Clipsal 31LCDA load correction device is designed to improve the dimming performance for most dimmable LEDs/CFLs. The device is suitable for use with Clipsal and Schneider Electric 2-wire, mains-powered dimmers that use phase-controlled (LE, TE or Universal) dimming. It is not used with 3-wire dimming units.
The device provides improved dimming performance and load stability for low-power dimmable CFL or LED lighting loads across a wide dimming range. It also provides a positive off-state for phase-controlled dimmer channels controlling electronic lighting loads and is designed to reduce flicker with dimmable LED lights.
The device is designed for dimmers connected to 220-240 VAC, 50 Hz mains voltages and has two non-polarised fly leads with stranded conductors. It must be installed in a containment box (for residential installations) or inside a service panel box (for DIN rail dimmer applications).
Phone: 1300 202 525
Milwaukee Tool M18 REDLITHIUM HIGH OUTPUT XC5 batteries
Milwaukee Tool has upgraded its M18 system by enhancing the M18 REDLITHIUM 5.0AH battery.
Legrand INSPYRA switch and socket range
Combining a sleek aesthetic with practical functionality, the range is designed for...
Adept Direct Cable Drum Channels
Built to accommodate cable reels up to 1000 kg in weight and 1000 mm in width, these channels...
