Laser safety sensor
01 April, 2008 | Supplied by: Jemtech Pty Ltd
The Shrike SH-L600 laser sensor features a housing fully moulded from polyurethane resins and rigidly built around a steel mounting plate. The design significantly controls laser drift caused by thermal expansion and contraction of the mounting materials.
Electrical safety coat
01 April, 2008 | Supplied by: Extreme Safety
The Rofa 91-488/196 Switching Coat is an arc and flash-resistant garment that has been designed to be worn by workers who work on switchgear or who perform switching in substations or on switchboards with high fault currents.
Snap-off knife
01 April, 2008 | Supplied by: Irwin Tools
The 18 mm ProTouch knife features a bi-metal snap-off blade with sharpness and durability in a blade that only snaps where it’s supposed to.
BFB 75K photoelectric sensors
01 April, 2008 | Supplied by: Balluff Pty Ltd
The BFB 75K series of fibre-optic photoelectric sensors are available in three model tiers.
Electrician’s screwdrivers
01 April, 2008 | Supplied by: RS
The Ergo 1000 V screwdriver set from Bacho are insulated-handle tools designed for use on electrical installations where voltages (AC or DC) of up to 1000 V may be present.
Compact earth leakage circuit breakers
01 April, 2008 | Supplied by: Pulset Pty Ltd
The 1-pole miniature RCBO earth leakage circuit breakers are the same size as standard 1-pole MCBs to enable high-density installations.
Hard hat cooling fan
01 April, 2008 | Supplied by: Wrights Hardware Pty Ltd
WorkFlow is an active cooling system for hard hats designed to combat heat stress during work.
Multi-pole connectors
01 April, 2008 | Supplied by: Tobin Electrical Components
The Gewiss range of IP65 rated multi-pole connectors features screw connection termination to minimise the potential of connections coming loose and PG cable entry.
DIN rail power supply
01 April, 2008 | Supplied by: Soanar Limited
The Meanwell MDR-100 series of 100 W miniature single output DIN rail switching power supply units are designed for use in automation, electromechanical and data communications applications.
Flexible firestop foam
01 April, 2008 | Supplied by: Hilti (Aust) Pty Ltd
The CP 660 flexible firestop foam is the single-system solution for firestopping and smoke sealing, suitable for use in electrical installation work.
Cable markers
01 April, 2008 | Supplied by: Soanar Limited
The Heatex range of cable markers from Brady are thermal printable labels, made up of zero halogen thermoplastic polyurethane material, suitable for both thermal and dot matrix printing.
Hole punch tool
01 April, 2008 | Supplied by: Weidmuller Pty Ltd
The Hydraulic Hand Puncher tool is designed for use in making round, square and rectangle cut-outs into steel and plastic panels. Form cut-outs for industrial multi-pole (6, 10, 16 and 24) connectors and industrial ethernet connectors can also be punched using special dies.
Roof rack ladder clamp
01 April, 2008 | Supplied by: European Building Innovations
The Ultimate Ladder Clamp is an innovative way to safely secure ladders to roof racks.
Powerware rack-based UPS for data centres
01 April, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The Powerware BladeUPS is an energy-efficient, rack-based uninterruptible power system (UPS) designed and optimised for high-powered blade servers and high-density computing environments.