AEMC power quality analyser
13 July, 2011 byThe model 8335 three-phase power quality analyser is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on one-, two- or three-phase networks. Four voltage and four current inputs are provided.
Eaton Ellipse ECO power protection
12 July, 2011 byEaton Corporation has released the Eaton Ellipse ECO. With its EcoControl function, the Ellipse UPS delivers energy savings of up to 25% compared to previous-generation products. This is achieved through EcoControl’s ability to automatically disable peripherals when the master device is turned off.
Balluff wind energy equipment power supply
18 April, 2011 byThe Balluff semi-potted power supply for use in wind energy equipment has an efficiency rating of 93%. It is designed for high shock and vibration loads and a long service life of nearly 20 years with a MTBF of 800,000 h.
IECI RSM-8Rx series console management switch with remote power reboot
28 March, 2011 byThe RSM-8Rx series console management switch provides secure remote access to RS232 console ports and the ability to power cycle remote IT equipment. Two models are available: RSM-8R4 providing eight RJ45 serial ports and four IEC reboot power outlets, and RSM-8R8 that provides eight RJ45 serial ports and eight reboot power outlets.
Eaton 3S UPS
27 March, 2011 byThe 3S UPS is designed for small office and point-of-sale applications. An all-in-one UPS, surge suppressor and power board, it can save up to a claimed 30% of power consumed by idle peripherals. It provides plug-and-play power and surge protection to computers, gaming consoles and audio-video equipment.
Automated Control Engineering SNT8024 switchmode DC power supply
08 March, 2011 byAutomated Control Engineering and FEAS have introduced the SNT8024 switchmode DC power supply, suitable for harsh industrial environments.
Modempak Clever intelligent PDU range
07 January, 2011The Modempak Clever range of intelligent network (LAN, WAN) monitored and controlled power distribution units, environmental monitoring and automatic switches is designed for use in cabinets for the management of servers and other power devices connected to the PDU. Typical applications include: data centres; utilities monitoring equipment; managing servers and IT equipment in remote office locations; and managing mission-critical environments in health and telecoms.
Legrand Stop & Go automatic power supply resetting device
17 December, 2010 byThe Stop & Go is an intelligent and secure automatic resetting device designed to protect circuits in homes and commercial properties. The device automatically restarts the power supply after an electrical fault.
Wieland Electric Wipos PB1 power supply series
02 December, 2010The Wieland Electric Wipos PB1 power supply series is suitable for electrical installations in various special-purpose and industrial buildings, where cabling is laid in suspended ceilings, in intermediate floors or in the dado trunking. Decentralised installation is often carried out at the same time, ie, the components for specific switching or automation tasks are also built into the ceiling, floor or trunking.
FEAS SNT230-K switchmode power supply series
08 November, 2010 byThe FEAS SNT230-K series switchmode power supplies are robust devices to power sensitive loads in harsh industrial environments. The devices feature modern construction with high RF shielding and high reliability integrated into a functional and stable casing.
Eaton Intelligent Power Protector shutdown application
08 November, 2010 byThe shutdown application known as Intelligent Power Protector (IPP) provides controlled, graceful shutdown of computers and servers powered by a UPS in the event of an extended power outage. Graceful shutdown allows work in progress to be saved and data to be preserved, thus avoiding data loss and file system corruption.
Western Telematic PTS-9CM20-2 automatic power transfer switch
08 November, 2010The PTS-9CM20-2 automatic power transfer switch manufactured by Western Telematic is designed to provide safe, reliable power fall-back for single-corded rackmount equipment.
Improving power quality and lowering energy consumption
08 September, 2010A focus on improved power quality, green energy and lowering energy consumption, the Walkers Arms Hotel at Walkerville, South Australia, is a benchmark for the use of innovative new technologies.
Mean Well TN/TS-3000 series DC/AC true sine wave inverters
31 August, 2010 byThe Mean Well TN/TS-3000 series DC/AC true sine wave inverters are lightweight and have a claimed efficiency of up to 92%. They can provide 3000 W continuously, 3450 W for 3 min, 4500 W for 10 s, or 6000 W surge power for 30 utility cycles.
Is power protection costing more than it should?
05 August, 2010All electronics in an organisation - from desktops to data centres - require continuous, clean power. Anything less puts businesses at risk of data corruption, equipment damage and unplanned downtime. Most organisations meet this requirement by having a central UPS that serves an entire building/data centre, or distributed UPSs placed closer to the equipment being protected, or both.
