Report on 40/100 gigabit ethernet markets predicts first revenues in 2010
25 February, 2009
A report from data communications analyst CIR forecasts the 40/100 gigabit ethernet market will take off in 2010, projecting that revenues from 40/100G ethernet transceivers will reach US$482 million by 2013.
Industrial category 6 UTP cables
03 February, 2009 | Supplied by: Belden Australia Pty Ltd
The DataTuff 7940A category 6 unshielded twisted pair cable is designed for industrial ethernet applications such as mission-critical network and automation system backbones being installed in discrete industrial manufacturing, processing plants and large industrial infrastructures such as water treatment and utility plants, airports, transportation terminals and shipyards.
Data equipment cabinet
03 February, 2009 | Supplied by: M Rutty & Co Pty Ltd
SmartRack is a multipurpose equipment cabinet that allows for 19", metric and wider ETSI sized equipment to be fitted in the one rack.
Data wall plate
03 February, 2009 | Supplied by: CommScope Technologies Australia Pty Ltd
The CopperTen 3-port Faceplate has been specifically designed to meet the performance requirements of 10 Gb ethernet applications, by spacing the outlets sufficiently distant from each other to minimise the impact of alien crosstalk at the outlet.
Category 7A cabling system
03 February, 2009 | Supplied by: Nexans Olex Australia Pty Ltd
The LANmark-7A shielded cabling solution has been developed to meet the predicted demand for 40 Gbps data applications from data centres and users planning to provide ‘video on demand’ services. Its release follows the recent ratification of international standards for new copper class category 7A standard (1000 MHz) designed for 40 Gbps applications.
Intrinsically safe transceiver
03 February, 2009 | Supplied by: Micromax Pty Ltd
The Banner Engineering DX99 wireless transceiver node is designed for installation in hazardous areas and combines three technologies in a single housing: battery-based power supply, wireless technology for mission critical data and intrinsically safe operation.
Computer room air conditioning
03 February, 2009 | Supplied by: Rittal Pty Ltd
The CRAC computer room air conditioning system is designed for installation and use in low- and medium-density data centre and computer processing environments.
Video surveillance data enclosure
03 February, 2009 | Supplied by: Rittal Pty Ltd
The Rittal security box enclosure is a tamper-proof security enclosure aimed at helping organisations protect their video surveillance equipment from unauthorised access.
Category 6A cabling system
03 February, 2009 | Supplied by: Nexans Olex Australia Pty Ltd
The LANmark-6A cabling system is part of the Nexans Cat 6A Zero Risk Solution, based on shielded products that ensure immunity from alien crosstalk and designed to address developing 10 Gb applications. Its release follows the recent ratification of international standards for new copper class category 6A standard (500 MHz) developed to support 10 Gb applications.
Impedance stabilisation for category 6 cabling
02 February, 2009 | Supplied by: Westek Electronics Pty Ltd
The ISN T8-Cat 6 impedance stabilisation network (ISN) from Teseise (formerly Schaffner Test Systems) is designed for measurements on up to four unshielded single balanced pairs of category 6 cables.
Category 6A shielded cabling system
02 February, 2009 | Supplied by: Molex Premise Networks Pty Ltd
The PowerCat 6A shielded solution is designed to fully support 10 Gb ethernet/10G Base-T/IEEE 802.3an while being backwards compatible for 10 Base-T, 100 Base-T and 1000 Base-T. The system is claimed to offer improved alien crosstalk mitigation and insertion loss over unshielded systems.
Optical fibre data transmission course
02 February, 2009 | Supplied by: Celemetrix Australia Pty Ltd
The CMT-08-070 SDH Operations & Maintenance training course is designed to provide an introduction to the operational fundamentals of SDH and PCM data transmission over optical media technologies.
Data centre monitor
02 February, 2009 | Supplied by: Opengear
The EMD5000 environmental monitor device product range is a monitoring solution to provide IT and facilities managers with around-the-clock monitoring of environmental conditions within data centres at the rack level.
CCTV camera with in-built lens
29 January, 2009 | Supplied by: Sanyo Oceania Pty Ltd
The full HD network VCC-HD4000 CCTV camera is designed for security monitoring in a range of different environments.
Data centre power management
01 January, 2009 | Supplied by: Opengear
Opengear console servers are now configured to incorporate power management software enabling data centre power infrastructure (PDU, UPS and IPMI power devices) from major vendors (including Powerware, MGE, TrippLite, Baytech and APC) to be managed.