ABB ACS2000 air-cooled general-purpose AC drives
15 March, 2010 | ABB Australia Pty Ltd
The ACS2000 air-cooled general-purpose AC drives are rated from 400 to 1000 kVA and up to 6.9 kV, and are designed for high reliability, easy installation and fast commissioning. Typical applications include fan, pump and compressor control in water, cement, mining, metals, oil and gas, pulp and paper, and power-generation industries.
ABB E250 latching relays
17 December, 2009 | ABB Australia Pty Ltd
The E250 range of latching relays (also known as stepping relays) offer convenient changeover of contact position after an impulse signal from a push-button or similar.
ABB PVS800 solar inverter
17 December, 2009 | ABB Australia Pty Ltd
The PVS800 solar inverter has been developed specifically for deployment in solar panel installations to convert the direct current that is produced by the sun in photovoltaic plates into alternating current that can be fed into the electrical grid.
Industrial drive modules
31 August, 2009 | ABB Australia Pty Ltd
The ACS850 industrial drive features an energy-saving calculator, embedded Modbus, drive-to-drive link, integrated safety and a removable memory unit.
Small-scale control system
31 August, 2009 | ABB Australia Pty Ltd
The AC500-eCo is a small-scale control system which can be adapted to meet individual requirements of smaller automation projects.
Pump and fan drive
09 July, 2009 | ABB Australia Pty Ltd
The low-voltage AC drive is designed for fast installation and commissioning in pump and fan applications. Built-in PID controllers vary the drive in response to changes in pressure, flow or other external data, eliminating the need for an external PLC.
High-immunity RCDs
03 February, 2009 | ABB Australia Pty Ltd
The AP-R range of residual current devices (RCDs) is designed with high-immunity characteristics to overcome the problems associated with unwanted tripping due to overvoltages of atmospheric or operational origin in domestic, commercial and industrial systems where service continuity is essential.
High-efficiency motors
01 December, 2008 | ABB Australia Pty Ltd
A range of low-voltage AC motors has been launched with improved energy efficiency and life cycle values over the ABB models they replace.
IP55-rated enclosures
01 September, 2008 | ABB Australia Pty Ltd
The IP55 range of enclosures and junction boxes has been developed with materials to ensure structural and environmental stability in harsh environments. The enclosures are available in 10 sizes, with internal dimensions from 100 x 100 x 80 mm to 310 x 240 x 160 mm.
Miniature circuit breaker
01 August, 2008 | ABB Australia Pty Ltd
The S200 range of miniature circuit breakers (MCBs) has been increased so that five different tripping characteristics are available across the full range, which incorporates standard short circuit capacities of 6, 10 and 15-25 kA.
Auxiliary contacts for MCBs
01 July, 2008 | ABB Australia Pty Ltd
Designed to mount on the bottom of the S200 range of ABB miniature circuit breakers (MCBs), the AC14 and DC13 auxiliary contacts are available as either a ‘1 NO’ or ‘1 NC’ contact configuration. Despite their small size, the switching contacts are full voltage rated at 2 A (AC14) at 230 VAC and 1 A (DC13) at 50 VDC.
Auto recloser for RCDs
01 July, 2008 | ABB Australia Pty Ltd
The F2C-ARI enables automatic reclosing of a residual current device (RCD) in case of nuisance tripping, eg, after an overvoltage created by lightning, making it particularly suitable for use in unmanned control panels in applications such as communications repeater stations, traffic and signalling control, pumping and irrigation stations, refrigeration and public lighting.
Compact combination RCBO
01 April, 2008 | ABB Australia Pty Ltd
The DS9 RCBO range provides a protection solution for all types of single-phase circuits in modern power distribution in domestic, commercial and industrial applications.
