Electrical distribution

Conservelec Sun Power Light Saver energy-saving device

08 November, 2010 | Supplied by: Conservelec Pty Ltd

The Sun Power Light Saver energy-saving device, when installed on the light circuit, adjusts optimal voltage for each lamp according to electricity supply conditions enabling a reduction in electricity consumption of a claimed 20%+. It is suitable for all fluorescent lights and high-intensity discharge lamps.


Tyco Electronics Solklip grounding products

08 November, 2010 | Supplied by: Soanar Limited

Tyco Electronics has expanded its line of Solarlok photovoltaic (PV) interconnect products with Solklip grounding products. The electrical and mechanical properties are UL compliant for PV module grounding applications.


Western Telematic PTS-9CM20-2 automatic power transfer switch

08 November, 2010 | Supplied by: Interworld Electronics and Computer Industries

The PTS-9CM20-2 automatic power transfer switch manufactured by Western Telematic is designed to provide safe, reliable power fall-back for single-corded rackmount equipment.


Unex cable tray and trunking range

08 November, 2010 | Supplied by: Unex

The Unex range of cable trays is suitable for supporting insulated electric cables in commercial and industrial applications and other cable management needs, where insulation and requirements for low-smoke, halogen-free, fire-retardant properties are required.


Project: Environmentally friendly electrical installation

05 November, 2010 | Supplied by: Albatech Pty Ltd

The ANZ Bank’s new head office in Melbourne’s Docklands precinct is Australia’s largest single-tenant office building, providing 87,000 m2 of floor space that accommodates some 6500 staff.


AMP NetConnect XG LAN cabling technology system

21 October, 2010 | Supplied by: Commscope

The AMP NetConnect XG LAN cabling technology system provides users with a next-generation network infrastructure to support 10 gigabit over both copper and fibre media. It comprises cable, connectors, termination closures and patch cords.


Will PVC in electrical products ever be considered ‘non-compliant’?

07 October, 2010 by Paul Stathis

According to Wikipedia, polyvinyl chloride - commonly abbreviated as PVC - is the third-most widely produced plastic in the world, after polyethylene and polypropylene. It is widely used in construction because it’s cheap, durable and easy to assemble. The annual global production of PVC is expected to exceed 40 million tonnes by 2016. In spite of its ubiquity, there is mounting pressure to ban it.


Protecting against electrical surges - 20 things you should know

07 October, 2010 by Paul Stathis

All electrical installations are subject to a frequently distorted electricity supply. Uncontrollable anomalies such as lightning strikes and electromagnetic interference can and do distort the AC supply into buildings. Some can be catastrophic, destroying equipment from a single surge, while others can be too small to notice on their own, but have a cumulatively detrimental effect on equipment that inexplicably fails over time. But there are simple ways to deal with these challenges.


Interworld Electronics MPC-HD series switched PDUs

28 September, 2010 | Supplied by: Interworld Electronics and Computer Industries

The MPC-HD series switched PDUs are designed to provide secure, remote power control and reboot capabilities for high current devices such as Sun Blade 6000, Cisco Nexus 7000 data centre switches and HP 7000 blade servers.


Safety alert for electrical installations

09 September, 2010

A safety alert has been issued to electrical contractors warning of the dangers of unsafe wiring for swing-stage installations.


Improving power quality and lowering energy consumption

08 September, 2010 | Supplied by: Clipsal - by Schneider Electric

A focus on improved power quality, green energy and lowering energy consumption, the Walkers Arms Hotel at Walkerville, South Australia, is a benchmark for the use of innovative new technologies.


Allen-Bradley emergency-stop push-buttons with safety ratings

08 September, 2010 | Supplied by: Rockwell Automation Australia

All Allen-Bradley emergency-stop push-buttons now have TÜV-certified B10d functional safety ratings, providing users with published certified safety product data for calculating the safety level of control safety systems.


Stahl IEC 6149 Toughlux series handlamps

01 September, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd

The 6149 Toughlux series of handlamps has been added to the range of Stahl IEC ex hazardous area equipment (HAE).


Moflash Signalling 80 series Xenon and LED beacons

01 September, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd

The Moflash Signalling 80 series compact Xenon and LED beacons are available in two voltage options: 10-100 VDC or 85-265 VAC, and IP67 rated.


DEHN + SOHNE DEHNguard M YPV SCI 600, M YPV SCI 1200 surge arresters

31 August, 2010 | Supplied by: DEHN + SOHNE GmbH + Co KG

The DEHNguard M YPV SCI 600 and M YPV SCI 1200 are UL-approved surge protection devices, designed to offer safety and protection for photovoltaic (PV) installations.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd